diff --git a/.config/polybar/bars.ini b/.config/polybar/bars.ini
new file mode 100644
index 0000000..b77f2fd
--- /dev/null
+++ b/.config/polybar/bars.ini
@@ -0,0 +1,605 @@
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+;;
+;;	    ____                 
+;;	   / __ )____ ___________
+;;	  / __  / __ `/ ___/ ___/
+;;	 / /_/ / /_/ / /  (__  ) 
+;;	/_____/\__,_/_/  /____/  
+;;
+;; Created By Aditya Shakya @adi1090x
+;;
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/volume]
+type = internal/alsa
+
+; Soundcard to be used
+; Usually in the format hw:# where # is the card number
+; You can find the different card numbers in `/proc/asound/cards`
+;;master-soundcard = default
+;;speaker-soundcard = default
+;;headphone-soundcard = default
+
+; Name of the master, speaker and headphone mixers
+; Use the following command to list available mixer controls:
+; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p"
+; If master, speaker or headphone-soundcard isn't the default, 
+; use `amixer -c # scontrols` instead where # is the number 
+; of the master, speaker or headphone soundcard respectively
+;
+; Default: Master
+;;master-mixer = Master
+
+; Optionally define speaker and headphone mixers
+; Default: none
+;;speaker-mixer = Speaker
+; Default: none
+;;headphone-mixer = Headphone
+
+; NOTE: This is required if headphone_mixer is defined
+; Use the following command to list available device controls
+; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort
+; You may also need to use `amixer -c # controls` as above for the mixer names
+; Default: none
+;;headphone-id = 9
+
+; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear
+; Default: false
+;;mapped = true
+
+; Interval for volume increase/decrease (in percent points)
+; Default: 5
+;;interval = 5
+
+; Available tags:
+;   <label-volume> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-volume = <ramp-volume> <bar-volume>
+
+; Available tags:
+;   <label-muted> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-muted = <label-muted>
+
+; Available tokens:
+;   %percentage% (default)
+label-volume = %percentage%%
+
+; Available tokens:
+;   %percentage% (default
+format-muted-prefix = 
+label-muted = " Muted"
+label-muted-foreground = ${color.ac}
+
+; Only applies if <ramp-volume> is used
+ramp-volume-0 = 
+ramp-volume-1 = 
+ramp-volume-2 = 
+ramp-volume-3 = 
+ramp-volume-4 = 
+
+; Only applies if <bar-volume> is used
+bar-volume-width = 10
+bar-volume-gradient = false
+
+bar-volume-indicator = 
+bar-volume-indicator-foreground = ${color.bi}
+bar-volume-indicator-font = 2
+
+bar-volume-fill = ━
+bar-volume-foreground-0 = ${color.bn}
+bar-volume-foreground-1 = ${color.bn}
+bar-volume-foreground-2 = ${color.bn}
+bar-volume-foreground-3 = ${color.bn}
+bar-volume-foreground-4 = ${color.bm}
+bar-volume-foreground-5 = ${color.bm}
+bar-volume-foreground-6 = ${color.bm}
+bar-volume-foreground-7 = ${color.bd}
+bar-volume-foreground-8 = ${color.bd}
+bar-volume-fill-font = 2
+
+bar-volume-empty = ┉
+bar-volume-empty-foreground = ${color.be}
+bar-volume-empty-font = 2
+
+; If defined, it will replace <ramp-volume> when
+; headphones are plugged in to `headphone_control_numid`
+; If undefined, <ramp-volume> will be used for both
+; Only applies if <ramp-volume> is used
+ramp-headphones-0 = 
+ramp-headphones-1 = 
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/brightness]
+type = internal/xbacklight
+
+; Use the following command to list available cards:
+; $ ls -1 /sys/class/backlight/
+card = intel_backlight
+
+; Available tags:
+;   <label> (default)
+;   <ramp>
+;   <bar>
+format = <ramp> <bar>
+
+; Available tokens:
+;   %percentage% (default)
+label = %percentage%%
+
+; Only applies if <ramp> is used
+
+ramp-0 = 
+ramp-1 = 
+ramp-2 = 
+ramp-3 = 
+ramp-4 = 
+
+;; Other Icons
+;
+
+; Only applies if <bar> is used
+bar-width = 10
+bar-gradient = false
+
+bar-indicator = 
+bar-indicator-foreground = ${color.bi}
+bar-indicator-font = 2
+
+bar-fill = ━
+bar-foreground-0 = ${color.bn}
+bar-foreground-1 = ${color.bn}
+bar-foreground-2 = ${color.bn}
+bar-foreground-3 = ${color.bm}
+bar-foreground-4 = ${color.bm}
+bar-foreground-5 = ${color.bd}
+bar-foreground-6 = ${color.bd}
+bar-foreground-7 = ${color.bd}
+bar-foreground-8 = ${color.bd}
+bar-fill-font = 2
+
+bar-empty = ┉
+bar-empty-foreground = ${color.be}
+bar-empty-font = 2
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/battery_bar]
+type = internal/battery
+
+; This is useful in case the battery never reports 100% charge
+full-at = 99
+
+; Use the following command to list batteries and adapters:
+; $ ls -1 /sys/class/power_supply/
+battery = BAT1
+adapter = ACAD
+
+; If an inotify event haven't been reported in this many
+; seconds, manually poll for new values.
+;
+; Needed as a fallback for systems that don't report events
+; on sysfs/procfs.
+;
+; Disable polling by setting the interval to 0.
+;
+; Default: 5
+poll-interval = 2
+
+; see "man date" for details on how to format the time string
+; NOTE: if you want to use syntax tags here you need to use %%{...}
+; Default: %H:%M:%S
+time-format = %H:%M
+
+; Available tags:
+;   <label-charging> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;   <animation-charging>
+format-charging = <bar-capacity>
+format-charging-prefix = " "
+
+; Available tags:
+;   <label-discharging> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;   <animation-discharging>
+format-discharging = <bar-capacity>
+format-discharging-prefix = " "
+
+; Available tags:
+;   <label-full> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;format-full = <ramp-capacity> <label-full>
+
+; Available tokens:
+;   %percentage% (default)
+;   %time%
+;   %consumption% (shows current charge rate in watts)
+
+label-charging = %percentage%%
+
+; Available tokens:
+;   %percentage% (default)
+;   %time%
+;   %consumption% (shows current discharge rate in watts)
+label-discharging = %percentage%%
+
+; Available tokens:
+;   %percentage% (default)
+label-full = Fully Charged
+
+; Only applies if <bar-capacity> is used
+bar-capacity-width = 10
+bar-capacity-gradient = false
+
+bar-capacity-indicator = 
+bar-capacity-indicator-foreground = ${color.bi}
+bar-capacity-indicator-font = 2
+
+bar-capacity-fill = ━
+bar-capacity-foreground-0 = ${color.bd}
+bar-capacity-foreground-1 = ${color.bd}
+bar-capacity-foreground-2 = ${color.bd}
+bar-capacity-foreground-3 = ${color.bm}
+bar-capacity-foreground-4 = ${color.bm}
+bar-capacity-foreground-5 = ${color.bm}
+bar-capacity-foreground-6 = ${color.bm}
+bar-capacity-foreground-7 = ${color.bn}
+bar-capacity-foreground-8 = ${color.bn}
+bar-capacity-fill-font = 2
+
+bar-capacity-empty = ┉
+bar-capacity-empty-foreground = ${color.be}
+bar-capacity-empty-font = 2
+
+; Only applies if <ramp-capacity> is used
+ramp-capacity-0 = 
+ramp-capacity-1 = 
+ramp-capacity-2 = 
+ramp-capacity-3 = 
+ramp-capacity-4 = 
+ramp-capacity-5 = 
+ramp-capacity-6 = 
+ramp-capacity-7 = 
+ramp-capacity-8 = 
+ramp-capacity-9 = 
+
+; Only applies if <animation-charging> is used
+animation-charging-0 = 
+animation-charging-1 = 
+animation-charging-2 = 
+animation-charging-3 = 
+animation-charging-4 = 
+animation-charging-5 = 
+animation-charging-6 = 
+animation-charging-7 = 
+animation-charging-8 = 
+
+; Framerate in milliseconds
+animation-charging-framerate = 750
+
+; Only applies if <animation-discharging> is used
+;;animation-discharging-0 = 
+;;animation-discharging-1 = 
+;;animation-discharging-2 = 
+;;animation-discharging-3 = 
+;;animation-discharging-4 = 
+;;animation-discharging-5 = 
+;;animation-discharging-6 = 
+;;animation-discharging-7 = 
+;;animation-discharging-8 = 
+
+; Framerate in milliseconds
+;animation-discharging-framerate = 500
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/cpu_bar]
+type = internal/cpu
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 0.5
+
+; Available tags:
+;   <label> (default)
+;   <bar-load>
+;   <ramp-load>
+;   <ramp-coreload>
+;;format = <label> <ramp-coreload>
+format = <bar-load> <label>
+format-prefix = " "
+
+; Available tokens:
+;   %percentage% (default) - total cpu load averaged over all cores
+;   %percentage-sum% - Cumulative load on all cores
+;   %percentage-cores% - load percentage for each core
+;   %percentage-core[1-9]% - load percentage for specific core
+label = "%percentage%%"
+
+; Only applies if <bar-load> is used
+bar-load-width = 10
+bar-load-gradient = false
+
+bar-load-indicator = 
+bar-load-indicator-foreground = ${color.bi}
+bar-load-indicator-font = 2
+
+bar-load-fill = ━
+bar-load-foreground-0 = ${color.bn}
+bar-load-foreground-1 = ${color.bn}
+bar-load-foreground-2 = ${color.bn}
+bar-load-foreground-3 = ${color.bm}
+bar-load-foreground-4 = ${color.bm}
+bar-load-foreground-5 = ${color.bm}
+bar-load-foreground-6 = ${color.bd}
+bar-load-foreground-7 = ${color.bd}
+bar-load-foreground-8 = ${color.bd}
+bar-load-fill-font = 2
+
+bar-load-empty = ┉
+bar-load-empty-foreground = ${color.be}
+bar-load-empty-font = 2
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/filesystem_bar]
+type = internal/fs
+
+; Mountpoints to display
+mount-0 = /
+;;mount-1 = /home
+;;mount-2 = /var
+
+; Seconds to sleep between updates
+; Default: 30
+interval = 10
+
+; Display fixed precision values
+; Default: false
+fixed-values = false
+
+; Spacing between entries
+; Default: 2
+;;spacing = 4
+
+; Available tags:
+;   <label-mounted> (default)
+;   <bar-free>
+;   <bar-used>
+;   <ramp-capacity>
+format-mounted = <bar-used> <label-mounted>
+format-mounted-prefix = " "
+
+; Available tags:
+;   <label-unmounted> (default)
+;;format-unmounted = <label-unmounted>
+;;format-unmounted-prefix = 
+
+; Available tokens:
+;   %mountpoint%
+;   %type%
+;   %fsname%
+;   %percentage_free%
+;   %percentage_used%
+;   %total%
+;   %free%
+;   %used%
+; Default: %mountpoint% %percentage_free%%
+label-mounted = %used%/%total%
+
+; Available tokens:
+;   %mountpoint%
+; Default: %mountpoint% is not mounted
+;;label-unmounted = %mountpoint%: not mounted
+
+; Only applies if <bar-used> is used
+bar-used-width = 10
+bar-used-gradient = false
+
+bar-used-indicator = 
+bar-used-indicator-foreground = ${color.bi}
+bar-used-indicator-font = 2
+
+bar-used-fill = ━
+bar-used-foreground-0 = ${color.bn}
+bar-used-foreground-1 = ${color.bn}
+bar-used-foreground-2 = ${color.bn}
+bar-used-foreground-3 = ${color.bn}
+bar-used-foreground-4 = ${color.bn}
+bar-used-foreground-5 = ${color.bm}
+bar-used-foreground-6 = ${color.bm}
+bar-used-foreground-7 = ${color.bd}
+bar-used-foreground-8 = ${color.bd}
+bar-used-fill-font = 2
+
+bar-used-empty = ┉
+bar-used-empty-foreground = ${color.be}
+bar-used-empty-font = 2
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/memory_bar]
+type = internal/memory
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 2
+
+; Available tags:
+;   <label> (default)
+;   <bar-used>
+;   <bar-free>
+;   <ramp-used>
+;   <ramp-free>
+;   <bar-swap-used>
+;   <bar-swap-free>
+;   <ramp-swap-used>
+;   <ramp-swap-free>
+format = <bar-used> <label>
+format-prefix = " "
+
+; Available tokens:
+;   %percentage_used% (default)
+;   %percentage_free%
+;   %gb_used%
+;   %gb_free%
+;   %gb_total%
+;   %mb_used%
+;   %mb_free%
+;   %mb_total%
+;   %percentage_swap_used%
+;   %percentage_swap_free%
+;   %mb_swap_total%
+;   %mb_swap_free%
+;   %mb_swap_used%
+;   %gb_swap_total%
+;   %gb_swap_free%
+;   %gb_swap_used%
+
+label = "%mb_used%"
+
+; Only applies if <bar-used> is used
+bar-used-width = 10
+bar-used-gradient = false
+
+bar-used-indicator = 
+bar-used-indicator-foreground = ${color.bi}
+bar-used-indicator-font = 2
+
+bar-used-fill = ━
+bar-used-foreground-0 = ${color.bn}
+bar-used-foreground-1 = ${color.bn}
+bar-used-foreground-2 = ${color.bn}
+bar-used-foreground-3 = ${color.bm}
+bar-used-foreground-4 = ${color.bm}
+bar-used-foreground-5 = ${color.bm}
+bar-used-foreground-6 = ${color.bd}
+bar-used-foreground-7 = ${color.bd}
+bar-used-foreground-8 = ${color.bd}
+bar-used-fill-font = 2
+
+bar-used-empty = ┉
+bar-used-empty-foreground = ${color.be}
+bar-used-empty-font = 2
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/mpd_bar]
+type = internal/mpd
+
+; Host where mpd is running (either ip or domain name)
+; Can also be the full path to a unix socket where mpd is running.
+;;host = 127.0.0.1
+;;port = 6600
+;;password = mysecretpassword
+
+; Seconds to sleep between progressbar/song timer sync
+; Default: 1
+interval = 1
+
+; Available tags:
+;   <label-song> (default)
+;   <label-time>
+;   <bar-progress>
+;   <toggle> - gets replaced with <icon-(pause|play)>
+;   <toggle-stop> - gets replaced with <icon-(stop|play)>
+;   <icon-random>
+;   <icon-repeat>
+;   <icon-repeatone> (deprecated)
+;   <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone>
+;   <icon-consume>
+;   <icon-prev>
+;   <icon-stop>
+;   <icon-play>
+;   <icon-pause>
+;   <icon-next>
+;   <icon-seekb>
+;   <icon-seekf>
+format-online =  <label-song> <bar-progress> <label-time> 
+
+;format-playing = ${self.format-online}
+;format-paused = ${self.format-online}
+;format-stopped = ${self.format-online}
+
+; Available tags:
+;   <label-offline>
+;format-offline = <label-offline>
+
+; Available tokens:
+;   %artist%
+;   %album-artist%
+;   %album%
+;   %date%
+;   %title%
+; Default: %artist% - %title%
+label-song =  "%title%"
+label-song-maxlen = 25
+label-song-ellipsis = true
+
+; Available tokens:
+;   %elapsed%
+;   %total%
+; Default: %elapsed% / %total%
+;;abel-time = %elapsed% / %total%
+
+; Available tokens:
+;   None
+label-offline = "mpd is offline"
+
+; Only applies if <icon-X> is used
+icon-play = 
+icon-pause = 
+icon-stop = 
+icon-prev = 
+icon-next = 
+icon-seekb = ⏪
+icon-seekf = ⏩
+icon-random = 🔀
+icon-repeat = 🔁
+icon-repeatone = 🔂
+icon-single = 🔂
+icon-consume = ✀
+
+; Used to display the state of random/repeat/repeatone/single
+; Only applies if <icon-[random|repeat|repeatone|single]> is used
+;;toggle-on-foreground = #ff
+;;toggle-off-foreground = #55
+
+; Only applies if <bar-progress> is used
+bar-progress-width = 10
+bar-progress-gradient = true
+
+bar-progress-indicator = 
+bar-progress-indicator-foreground = ${color.bi}
+bar-progress-indicator-font = 2
+
+bar-progress-fill = ━
+bar-progress-foreground-0 = ${color.bn}
+bar-progress-foreground-1 = ${color.bn}
+bar-progress-foreground-2 = ${color.bn}
+bar-progress-foreground-3 = ${color.bm}
+bar-progress-foreground-4 = ${color.bm}
+bar-progress-foreground-5 = ${color.bm}
+bar-progress-foreground-6 = ${color.bd}
+bar-progress-foreground-7 = ${color.bd}
+bar-progress-foreground-8 = ${color.bd}
+bar-progress-fill-font = 2
+
+bar-progress-empty = ┉
+bar-progress-empty-foreground = ${color.be}
+bar-progress-empty-font = 2
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+;;	    __________  ______
+;;	   / ____/ __ \/ ____/
+;;	  / __/ / / / / /_    
+;;	 / /___/ /_/ / __/    
+;;	/_____/\____/_/       
+;;
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
diff --git a/.config/polybar/colors.ini b/.config/polybar/colors.ini
new file mode 100644
index 0000000..951dbcf
--- /dev/null
+++ b/.config/polybar/colors.ini
@@ -0,0 +1,265 @@
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+;;
+;;	   ______      __               
+;;	  / ____/___  / /___  __________
+;;	 / /   / __ \/ / __ \/ ___/ ___/
+;;	/ /___/ /_/ / / /_/ / /  (__  ) 
+;;	\____/\____/_/\____/_/  /____/  
+;;
+;; Created By Aditya Shakya @adi1090x
+;;
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[color]
+
+;; Active Colors
+bg = #263238
+fg = #DFDFDF
+ac = #00BCD4
+
+;; Bars
+bi = #00BCD4
+be = #00BCD4
+bf = #43a047
+bn = #43a047
+bm = #fdd835
+bd = #e53935
+
+;bg = #112526
+;fg = #AE9793
+;ac = #EE7313
+
+;; Bars
+;bi = #EE7313
+;be = #EE7313
+;bf = #43a047
+;bn = #43a047
+;bm = #fdd835
+;bd = #e53935
+
+trans = #00000000
+white = #FFFFFF
+black = #000000
+
+;; Material Colors
+
+red = #e53935
+pink = #d81b60
+purple = #8e24aa
+deep-purple = #5e35b1
+indigo = #3949ab
+blue = #1e88e5
+light-blue = #039be5
+cyan = #00acc1
+teal = #00897b
+green = #43a047
+light-green = #7cb342
+lime = #c0ca33
+yellow = #fdd835
+amber = #ffb300
+orange = #fb8c00
+deep-orange = #f4511e
+brown = #6d4c41
+grey = #757575
+blue-gray = #546e7a
+
+;; Material Colors Shades
+
+; Amber
+amshade1 = #FF6F00
+amshade2 = #FF8F00
+amshade3 = #FFA000
+amshade4 = #FFB300
+amshade5 = #FFC107
+amshade6 = #FFCA28
+amshade7 = #FFD54F
+amshade8 = #FFE082
+
+; Blue 
+blshade1 = #0D47A1
+blshade2 = #1565C0
+blshade3 = #1976D2
+blshade4 = #1E88E5
+blshade5 = #2196F3
+blshade6 = #42A5F5
+blshade7 = #64B5F6
+blshade8 = #90CAF9
+
+; Blue-Grey
+bgshade1 = #263238
+bgshade2 = #37474F
+bgshade3 = #455A64
+bgshade4 = #546E7A
+bgshade5 = #607D8B
+bgshade6 = #78909C
+bgshade7 = #90A4AE
+bgshade8 = #B0BEC5
+
+; Brown
+brshade1 = #3E2723
+brshade2 = #4E342E
+brshade3 = #5D4037
+brshade4 = #6D4C41
+brshade5 = #795548
+brshade6 = #8D6E63
+brshade7 = #A1887F
+brshade8 = #BCAAA4
+
+; Cyan
+cyshade1 = #006064
+cyshade2 = #00838F
+cyshade3 = #0097A7
+cyshade4 = #00ACC1
+cyshade5 = #00BCD4
+cyshade6 = #26C6DA
+cyshade7 = #4DD0E1
+cyshade8 = #80DEEA
+
+; Deep-Orange
+doshade1 = #BF360C
+doshade2 = #D84315
+doshade3 = #E64A19
+doshade4 = #F4511E
+doshade5 = #FF5722
+doshade6 = #FF7043
+doshade7 = #FF8A65
+doshade8 = #FFAB91
+
+; Deep-Purple
+dpshade1 = #311B92
+dpshade2 = #4527A0
+dpshade3 = #512DA8
+dpshade4 = #5E35B1
+dpshade5 = #673AB7
+dpshade6 = #7E57C2
+dpshade7 = #9575CD
+dpshade8 = #B39DDB
+
+; Green
+grshade1 = #1B5E20
+grshade2 = #2E7D32
+grshade3 = #388E3C
+grshade4 = #43A047
+grshade5 = #4CAF50
+grshade6 = #66BB6A
+grshade7 = #81C784
+grshade8 = #A5D6A7
+
+; Grey
+greshade1 = #212121
+greshade2 = #424242
+greshade3 = #616161
+greshade4 = #757575
+greshade5 = #9E9E9E
+greshade6 = #BDBDBD
+greshade7 = #D4D4D4
+greshade8 = #EEEEEE
+
+; Indigo
+inshade1 = #1A237E
+inshade2 = #283593
+inshade3 = #303F9F
+inshade4 = #3949AB
+inshade5 = #3F51B5
+inshade6 = #5C6BC0
+inshade7 = #7986CB
+inshade8 = #9FA8DA
+
+; Light-Blue
+lbshade1 = #01579B
+lbshade2 = #0277BD
+lbshade3 = #0288D1
+lbshade4 = #039BE5
+lbshade5 = #03A9F4
+lbshade6 = #29B6F6
+lbshade7 = #4FC3F7
+lbshade8 = #81D4FA
+
+; Light-Green
+lgshade1 = #33691E
+lgshade2 = #558B2F
+lgshade3 = #689F38
+lgshade4 = #7CB342
+lgshade5 = #8BC34A
+lgshade6 = #9CCC65
+lgshade7 = #AED581
+lgshade8 = #C5E1A5
+
+; Lime
+lishade1 = #827717
+lishade2 = #9E9D24
+lishade3 = #AFB42B
+lishade4 = #C0CA33
+lishade5 = #CDDC39
+lishade6 = #D4E157
+lishade7 = #DCE775
+lishade8 = #E6EE9C
+
+; Orange
+orshade1 = #E65100
+orshade2 = #EF6C00
+orshade3 = #F57C00
+orshade4 = #FB8C00
+orshade5 = #FF9800
+orshade6 = #FFA726
+orshade7 = #FFB74D
+orshade8 = #FFCC80
+
+; Pink
+pishade1 = #880E4F
+pishade2 = #AD1457
+pishade3 = #C2185B
+pishade4 = #D81B60
+pishade5 = #E91E63
+pishade6 = #EC407A
+pishade7 = #F06292
+pishade8 = #F48FB1
+
+; Purple
+prshade1 = #4A148C
+prshade2 = #6A1B9A
+prshade3 = #7B1FA2
+prshade4 = #8E24AA
+prshade5 = #9C27B0
+prshade6 = #AB47BC
+prshade7 = #BA68C8
+prshade8 = #CE93D8
+
+; Red
+reshade1 = #B71C1C
+reshade2 = #C62828
+reshade3 = #D32F2F
+reshade4 = #E53935
+reshade5 = #EE413D
+reshade6 = #EF5350
+reshade7 = #E57373
+reshade8 = #EF9A9A
+
+; Teal
+teshade1 = #004D40
+teshade2 = #00695C
+teshade3 = #00796B
+teshade4 = #00897B
+teshade5 = #009688
+teshade6 = #26A69A
+teshade7 = #4DB6AC
+teshade8 = #80CBC4
+
+; Yellow
+yeshade1 = #F57F17
+yeshade2 = #F9A825
+yeshade3 = #FBC02D
+yeshade4 = #FDD835
+yeshade5 = #FFEB3B
+yeshade6 = #FFEE58
+yeshade7 = #FFF176
+yeshade8 = #FFF59D
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+;;	    __________  ______
+;;	   / ____/ __ \/ ____/
+;;	  / __/ / / / / /_    
+;;	 / /___/ /_/ / __/    
+;;	/_____/\____/_/       
+;;
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
diff --git a/.config/polybar/config-bottom.ini b/.config/polybar/config-bottom.ini
new file mode 100644
index 0000000..4f2ead2
--- /dev/null
+++ b/.config/polybar/config-bottom.ini
@@ -0,0 +1,334 @@
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+;;
+;;	    ____        __      __              
+;;	   / __ \____  / /_  __/ /_  ____ ______
+;;	  / /_/ / __ \/ / / / / __ \/ __ `/ ___/
+;;	 / ____/ /_/ / / /_/ / /_/ / /_/ / /    
+;;	/_/    \____/_/\__, /_.___/\__,_/_/     
+;;	              /____/                    
+;;
+;; Created By Aditya Shakya @adi1090x
+;;
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Global WM Settings
+
+[global/wm]
+; Adjust the _NET_WM_STRUT_PARTIAL top value
+; Used for top aligned bars
+margin-bottom = 0
+
+; Adjust the _NET_WM_STRUT_PARTIAL bottom value
+; Used for bottom aligned bars
+margin-top = 0
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; File Inclusion
+; include an external file, like module file, etc.
+
+include-file = ~/.config/polybar/colors.ini
+include-file = ~/.config/polybar/modules.ini
+include-file = ~/.config/polybar/user_modules.ini
+include-file = ~/.config/polybar/bars.ini
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Bar Settings
+
+[bar/bottom]
+; Use either of the following command to list available outputs:
+; If unspecified, the application will pick the first one it finds.
+; $ polybar -m | cut -d ':' -f 1
+; $ xrandr -q | grep " connected" | cut -d ' ' -f1
+monitor = ${env:MONITOR:} 
+
+; Use the specified monitor as a fallback if the main one is not found.
+monitor-fallback =
+
+; Require the monitor to be in connected state
+; XRandR sometimes reports my monitor as being disconnected (when in use)
+monitor-strict = false
+
+; Tell the Window Manager not to configure the window.
+; Use this to detach the bar if your WM is locking its size/position.
+override-redirect = false
+
+; Put the bar at the bottom of the screen
+bottom = true
+
+; Prefer fixed center position for the `modules-center` block
+; When false, the center position will be based on the size of the other blocks.
+fixed-center = true
+
+; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in a width or height of 50% minus 10 pixels
+width = 100%
+height = 30
+
+; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in an offset in the x or y direction 
+; of 50% minus 10 pixels
+offset-x = 0
+offset-y = 0
+
+; Background ARGB color (e.g. #f00, #ff992a, #ddff1023)
+background = ${color.bg}
+
+; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023)
+foreground = ${color.fg}
+
+; Background gradient (vertical steps)
+;   background-[0-9]+ = #aarrggbb
+;;background-0 = 
+
+; Value used for drawing rounded corners
+; Note: This shouldn't be used together with border-size because the border 
+; doesn't get rounded
+; Individual top/bottom values can be defined using:
+;   radius-{top,bottom}
+radius-top = 0.0
+radius-bottom = 0.0
+
+; Under-/overline pixel size and argb color
+; Individual values can be defined using:
+;   {overline,underline}-size
+;   {overline,underline}-color
+line-size = 2
+line-color = ${color.ac}
+
+; Values applied to all borders
+; Individual side values can be defined using:
+;   border-{left,top,right,bottom}-size
+;   border-{left,top,right,bottom}-color
+; The top and bottom borders are added to the bar height, so the effective
+; window height is:
+;   height + border-top-size + border-bottom-size
+; Meanwhile the effective window width is defined entirely by the width key and
+; the border is placed withing this area. So you effectively only have the
+; following horizontal space on the bar:
+;   width - border-right-size - border-left-size
+border-top-size = 2
+border-color = ${color.ac}
+
+; Number of spaces to add at the beginning/end of the bar
+; Individual side values can be defined using:
+;   padding-{left,right}
+padding = 1
+
+; Number of spaces to add before/after each module
+; Individual side values can be defined using:
+;   module-margin-{left,right}
+module-margin-left = 1
+module-margin-right = 1
+
+; Fonts are defined using <font-name>;<vertical-offset>
+; Font names are specified using a fontconfig pattern.
+;   font-0 = NotoSans-Regular:size=8;2
+;   font-1 = MaterialIcons:size=10
+;   font-2 = Termsynu:size=8;-1
+;   font-3 = FontAwesome:size=10
+; See the Fonts wiki page for more details
+
+font-0 = "Misc Termsyn:size=12;1"
+font-1 = "Wuncon Siji:size=12;1"
+font-2 = "xos4 Terminus:size=12;1"
+
+; Modules are added to one of the available blocks
+;   modules-left = cpu ram
+;   modules-center = xwindow xbacklight
+;   modules-right = ipc clock
+
+;; Available modules
+;;
+;alsa backlight battery
+;bspwm cpu date
+;filesystem github i3
+;subscriber demo memory
+;menu-apps mpd wired-network
+;wireless-network network pulseaudio
+;name_you_want temperature my-text-label
+;backlight keyboard title workspaces
+;;
+;; User modules
+;checknetwork updates window_switch launcher powermenu sysmenu menu
+;;
+;; Bars
+;cpu_bar memory_bar filesystem_bar mpd_bar 
+;volume brightness battery_bar 
+
+modules-left = mpd
+modules-center = filesystem cpu memory temperature updates network
+modules-right = volume brightness date
+
+; The separator will be inserted between the output of each module
+separator =
+
+; This value is used to add extra spacing between elements
+; @deprecated: This parameter will be removed in an upcoming version
+spacing = 0
+
+; Opacity value between 0.0 and 1.0 used on fade in/out
+dim-value = 1.0
+
+; Value to be used to set the WM_NAME atom
+; If the value is empty or undefined, the atom value
+; will be created from the following template: polybar-[BAR]_[MONITOR]
+; NOTE: The placeholders are not available for custom values
+wm-name = 
+
+; Locale used to localize various module data (e.g. date)
+; Expects a valid libc locale, for example: sv_SE.UTF-8
+locale = 
+
+; Position of the system tray window
+; If empty or undefined, tray support will be disabled
+; NOTE: A center aligned tray will cover center aligned modules
+;
+; Available positions:
+;   left
+;   center
+;   right
+;   none
+tray-position = none
+
+; If true, the bar will not shift its
+; contents when the tray changes
+tray-detached = false
+
+; Tray icon max size
+tray-maxsize = 16
+
+; DEPRECATED! Since 3.3.0 the tray always uses pseudo-transparency
+; Enable pseudo transparency
+; Will automatically be enabled if a fully transparent
+; background color is defined using `tray-background`
+tray-transparent = false
+
+; Background color for the tray container 
+; ARGB color (e.g. #f00, #ff992a, #ddff1023)
+; By default the tray container will use the bar
+; background color.
+tray-background = ${root.background}
+
+; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+tray-offset-x = 0
+tray-offset-y = 0
+
+; Pad the sides of each tray icon
+tray-padding = 0
+
+; Scale factor for tray clients
+tray-scale = 1.0
+
+; Restack the bar window and put it above the
+; selected window manager's root
+;
+; Fixes the issue where the bar is being drawn
+; on top of fullscreen window's
+;
+; Currently supported WM's:
+;   bspwm
+;   i3 (requires: `override-redirect = true`)
+; wm-restack =
+
+; Set a DPI values used when rendering text
+; This only affects scalable fonts
+; dpi = 
+
+; Enable support for inter-process messaging
+; See the Messaging wiki page for more details.
+enable-ipc = false
+
+; Fallback click handlers that will be called if
+; there's no matching module handler found.
+click-left = 
+click-middle = 
+click-right =
+scroll-up =
+scroll-down =
+double-click-left =
+double-click-middle =
+double-click-right =
+
+; Requires polybar to be built with xcursor support (xcb-util-cursor)
+; Possible values are:
+; - default   : The default pointer as before, can also be an empty string (default)
+; - pointer   : Typically in the form of a hand
+; - ns-resize : Up and down arrows, can be used to indicate scrolling
+cursor-click = 
+cursor-scroll = 
+
+;; WM Workspace Specific
+
+; bspwm
+;;scroll-up = bspwm-desknext
+;;scroll-down = bspwm-deskprev
+;;scroll-up = bspc desktop -f prev.local
+;;scroll-down = bspc desktop -f next.local
+
+;i3
+;;scroll-up = i3wm-wsnext
+;;scroll-down = i3wm-wsprev
+;;scroll-up = i3-msg workspace next_on_output
+;;scroll-down = i3-msg workspace prev_on_output
+
+;openbox
+;awesome
+;etc
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Application Settings
+
+[settings]
+; The throttle settings lets the eventloop swallow up til X events
+; if they happen within Y millisecond after first event was received.
+; This is done to prevent flood of update event.
+;
+; For example if 5 modules emit an update event at the same time, we really
+; just care about the last one. But if we wait too long for events to swallow
+; the bar would appear sluggish so we continue if timeout
+; expires or limit is reached.
+throttle-output = 5
+throttle-output-for = 10
+
+; Time in milliseconds that the input handler will wait between processing events
+throttle-input-for = 30
+
+; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events
+screenchange-reload = false
+
+; Compositing operators
+; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t
+compositing-background = source
+compositing-foreground = over
+compositing-overline = over
+compositing-underline = over
+compositing-border = over
+
+; Define fallback values used by all module formats
+format-foreground = 
+format-background = 
+format-underline =
+format-overline =
+format-spacing =
+format-padding =
+format-margin =
+format-offset =
+
+; Enables pseudo-transparency for the bar
+; If set to true the bar can be transparent without a compositor.
+pseudo-transparency = false
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+;;	    __________  ______
+;;	   / ____/ __ \/ ____/
+;;	  / __/ / / / / /_    
+;;	 / /___/ /_/ / __/    
+;;	/_____/\____/_/       
+;;
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
diff --git a/.config/polybar/config-top.ini b/.config/polybar/config-top.ini
new file mode 100644
index 0000000..44f1652
--- /dev/null
+++ b/.config/polybar/config-top.ini
@@ -0,0 +1,333 @@
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+;;
+;;	    ____        __      __              
+;;	   / __ \____  / /_  __/ /_  ____ ______
+;;	  / /_/ / __ \/ / / / / __ \/ __ `/ ___/
+;;	 / ____/ /_/ / / /_/ / /_/ / /_/ / /    
+;;	/_/    \____/_/\__, /_.___/\__,_/_/     
+;;	              /____/                    
+;;
+;; Created By Aditya Shakya @adi1090x
+;;
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Global WM Settings
+
+[global/wm]
+; Adjust the _NET_WM_STRUT_PARTIAL top value
+; Used for top aligned bars
+margin-bottom = 0
+
+; Adjust the _NET_WM_STRUT_PARTIAL bottom value
+; Used for bottom aligned bars
+margin-top = 0
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; File Inclusion
+; include an external file, like module file, etc.
+
+include-file = ~/.config/polybar/colors.ini
+include-file = ~/.config/polybar/modules.ini
+include-file = ~/.config/polybar/user_modules.ini
+include-file = ~/.config/polybar/bars.ini
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Bar Settings
+
+[bar/top]
+; Use either of the following command to list available outputs:
+; If unspecified, the application will pick the first one it finds.
+; $ polybar -m | cut -d ':' -f 1
+; $ xrandr -q | grep " connected" | cut -d ' ' -f1
+monitor = ${env:MONITOR:} 
+
+; Use the specified monitor as a fallback if the main one is not found.
+monitor-fallback =
+
+; Require the monitor to be in connected state
+; XRandR sometimes reports my monitor as being disconnected (when in use)
+monitor-strict = false
+
+; Tell the Window Manager not to configure the window.
+; Use this to detach the bar if your WM is locking its size/position.
+override-redirect = false
+
+; Put the bar at the bottom of the screen
+bottom = false
+
+; Prefer fixed center position for the `modules-center` block
+; When false, the center position will be based on the size of the other blocks.
+fixed-center = true
+
+; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in a width or height of 50% minus 10 pixels
+width = 100%
+height = 30
+
+; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in an offset in the x or y direction 
+; of 50% minus 10 pixels
+offset-x = 0
+offset-y = 0
+
+; Background ARGB color (e.g. #f00, #ff992a, #ddff1023)
+background = ${color.bg}
+
+; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023)
+foreground = ${color.fg}
+
+; Background gradient (vertical steps)
+;   background-[0-9]+ = #aarrggbb
+;;background-0 = 
+
+; Value used for drawing rounded corners
+; Note: This shouldn't be used together with border-size because the border 
+; doesn't get rounded
+; Individual top/bottom values can be defined using:
+;   radius-{top,bottom}
+radius-top = 0.0
+radius-bottom = 0.0
+
+; Under-/overline pixel size and argb color
+; Individual values can be defined using:
+;   {overline,underline}-size
+;   {overline,underline}-color
+line-size = 2
+line-color = ${color.ac}
+
+; Values applied to all borders
+; Individual side values can be defined using:
+;   border-{left,top,right,bottom}-size
+;   border-{left,top,right,bottom}-color
+; The top and bottom borders are added to the bar height, so the effective
+; window height is:
+;   height + border-top-size + border-bottom-size
+; Meanwhile the effective window width is defined entirely by the width key and
+; the border is placed withing this area. So you effectively only have the
+; following horizontal space on the bar:
+;   width - border-right-size - border-left-size
+border-bottom-size = 2
+border-color = ${color.ac}
+
+; Number of spaces to add at the beginning/end of the bar
+; Individual side values can be defined using:
+;   padding-{left,right}
+padding = 1
+
+; Number of spaces to add before/after each module
+; Individual side values can be defined using:
+;   module-margin-{left,right}
+module-margin-left = 1
+module-margin-right = 1
+
+; Fonts are defined using <font-name>;<vertical-offset>
+; Font names are specified using a fontconfig pattern.
+;   font-0 = NotoSans-Regular:size=8;2
+;   font-1 = MaterialIcons:size=10
+;   font-2 = Termsynu:size=8;-1
+;   font-3 = FontAwesome:size=10
+; See the Fonts wiki page for more details
+
+font-0 = "Misc Termsyn:size=12;1"
+font-1 = "Wuncon Siji:size=12;1"
+font-2 = "xos4 Terminus:size=12;2"
+
+; Modules are added to one of the available blocks
+;   modules-left = cpu ram
+;   modules-center = xwindow xbacklight
+;   modules-right = ipc clock
+
+;; Available modules
+;;
+;alsa backlight battery
+;bspwm cpu date
+;filesystem github i3
+;subscriber demo memory
+;menu-apps mpd wired-network
+;wireless-network network pulseaudio
+;name_you_want temperature my-text-label
+;backlight keyboard title workspaces 
+;;
+;; User modules
+;checknetwork updates window_switch launcher powermenu sysmenu menu
+;;
+;; Bars
+;cpu_bar memory_bar filesystem_bar mpd_bar 
+;volume brightness battery_bar 
+
+modules-left = menu title
+modules-center = workspaces
+modules-right = window_switch keyboard battery alsa checknetwork sysmenu
+
+; The separator will be inserted between the output of each module
+separator =
+
+; This value is used to add extra spacing between elements
+; @deprecated: This parameter will be removed in an upcoming version
+spacing = 0
+
+; Opacity value between 0.0 and 1.0 used on fade in/out
+dim-value = 1.0
+
+; Value to be used to set the WM_NAME atom
+; If the value is empty or undefined, the atom value
+; will be created from the following template: polybar-[BAR]_[MONITOR]
+; NOTE: The placeholders are not available for custom values
+wm-name = 
+
+; Locale used to localize various module data (e.g. date)
+; Expects a valid libc locale, for example: sv_SE.UTF-8
+locale = 
+
+; Position of the system tray window
+; If empty or undefined, tray support will be disabled
+; NOTE: A center aligned tray will cover center aligned modules
+;
+; Available positions:
+;   left
+;   center
+;   right
+;   none
+tray-position = none
+
+; If true, the bar will not shift its
+; contents when the tray changes
+tray-detached = false
+
+; Tray icon max size
+tray-maxsize = 16
+
+; DEPRECATED! Since 3.3.0 the tray always uses pseudo-transparency
+; Enable pseudo transparency
+; Will automatically be enabled if a fully transparent
+; background color is defined using `tray-background`
+tray-transparent = false
+
+; Background color for the tray container 
+; ARGB color (e.g. #f00, #ff992a, #ddff1023)
+; By default the tray container will use the bar
+; background color.
+tray-background = ${root.background}
+
+; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+tray-offset-x = 0
+tray-offset-y = 0
+
+; Pad the sides of each tray icon
+tray-padding = 0
+
+; Scale factor for tray clients
+tray-scale = 1.0
+
+; Restack the bar window and put it above the
+; selected window manager's root
+;
+; Fixes the issue where the bar is being drawn
+; on top of fullscreen window's
+;
+; Currently supported WM's:
+;   bspwm
+;   i3 (requires: `override-redirect = true`)
+; wm-restack =
+
+; Set a DPI values used when rendering text
+; This only affects scalable fonts
+; dpi = 
+
+; Enable support for inter-process messaging
+; See the Messaging wiki page for more details.
+enable-ipc = false
+
+; Fallback click handlers that will be called if
+; there's no matching module handler found.
+click-left = 
+click-middle = 
+click-right =
+scroll-up =
+scroll-down =
+double-click-left =
+double-click-middle =
+double-click-right =
+
+; Requires polybar to be built with xcursor support (xcb-util-cursor)
+; Possible values are:
+; - default   : The default pointer as before, can also be an empty string (default)
+; - pointer   : Typically in the form of a hand
+; - ns-resize : Up and down arrows, can be used to indicate scrolling
+cursor-click = 
+cursor-scroll = 
+
+;; WM Workspace Specific
+
+; bspwm
+;;scroll-up = bspwm-desknext
+;;scroll-down = bspwm-deskprev
+;;scroll-up = bspc desktop -f prev.local
+;;scroll-down = bspc desktop -f next.local
+
+;i3
+;;scroll-up = i3wm-wsnext
+;;scroll-down = i3wm-wsprev
+;;scroll-up = i3-msg workspace next_on_output
+;;scroll-down = i3-msg workspace prev_on_output
+
+;openbox
+;awesome
+;etc
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Application Settings
+
+[settings]
+; The throttle settings lets the eventloop swallow up til X events
+; if they happen within Y millisecond after first event was received.
+; This is done to prevent flood of update event.
+;
+; For example if 5 modules emit an update event at the same time, we really
+; just care about the last one. But if we wait too long for events to swallow
+; the bar would appear sluggish so we continue if timeout
+; expires or limit is reached.
+throttle-output = 5
+throttle-output-for = 10
+
+; Time in milliseconds that the input handler will wait between processing events
+throttle-input-for = 30
+
+; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events
+screenchange-reload = true
+
+; Compositing operators
+; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t
+compositing-background = source
+compositing-foreground = over
+compositing-overline = over
+compositing-underline = over
+compositing-border = over
+
+; Define fallback values used by all module formats
+format-foreground = 
+format-background = 
+format-underline =
+format-overline =
+format-spacing =
+format-padding =
+format-margin =
+format-offset =
+
+; Enables pseudo-transparency for the bar
+; If set to true the bar can be transparent without a compositor.
+pseudo-transparency = false
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+;;	    __________  ______
+;;	   / ____/ __ \/ ____/
+;;	  / __/ / / / / /_    
+;;	 / /___/ /_/ / __/    
+;;	/_____/\____/_/       
+;;
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
diff --git a/.config/polybar/launch.sh b/.config/polybar/launch.sh
index e86151d..1d2aa40 100755
--- a/.config/polybar/launch.sh
+++ b/.config/polybar/launch.sh
@@ -1,7 +1,6 @@
 #!/usr/bin/env sh
 
-config_file = 
-echo "test"
+## Add this to your wm startup file.
 
 # Terminate already running bar instances
 killall -q polybar
@@ -9,6 +8,14 @@ killall -q polybar
 # Wait until the processes have been shut down
 while pgrep -u $UID -x polybar >/dev/null; do sleep 1; done
 
-# Launch polybar
-polybar -rq top_bar -c $HOME/.config/polybar/test1 &
-polybar -rq bottom_bar -c $HOME/.config/polybar/test1 &
+# List monitors to load the bars on every one of them
+if type "xrandr"; then
+    for m in $(xrandr --query | grep " connected" | cut -d" " -f1); do
+        MONITOR=$m polybar top -c ~/.config/polybar/config-top.ini &
+        MONITOR=$m polybar bottom -c ~/.config/polybar/config-bottom.ini &
+    done
+else
+    # Launch bar1 and bar2
+    polybar top -c ~/.config/polybar/config-top.ini &
+    polybar bottom -c ~/.config/polybar/config-bottom.ini &
+fi
diff --git a/.config/polybar/modules.ini b/.config/polybar/modules.ini
new file mode 100644
index 0000000..687815a
--- /dev/null
+++ b/.config/polybar/modules.ini
@@ -0,0 +1,1146 @@
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+;;
+;;	    __  ___          __      __         
+;;	   /  |/  /___  ____/ /_  __/ /__  _____
+;;	  / /|_/ / __ \/ __  / / / / / _ \/ ___/
+;;	 / /  / / /_/ / /_/ / /_/ / /  __(__  ) 
+;;	/_/  /_/\____/\__,_/\__,_/_/\___/____/  
+;;
+;; Created By Aditya Shakya @adi1090x
+;;
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/alsa]
+type = internal/alsa
+
+; Soundcard to be used
+; Usually in the format hw:# where # is the card number
+; You can find the different card numbers in `/proc/asound/cards`
+;;master-soundcard = default
+;;speaker-soundcard = default
+;;headphone-soundcard = default
+
+; Name of the master, speaker and headphone mixers
+; Use the following command to list available mixer controls:
+; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p"
+; If master, speaker or headphone-soundcard isn't the default, 
+; use `amixer -c # scontrols` instead where # is the number 
+; of the master, speaker or headphone soundcard respectively
+;
+; Default: Master
+;;master-mixer = Master
+
+; Optionally define speaker and headphone mixers
+; Default: none
+;;speaker-mixer = Speaker
+; Default: none
+;;headphone-mixer = Headphone
+
+; NOTE: This is required if headphone_mixer is defined
+; Use the following command to list available device controls
+; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort
+; You may also need to use `amixer -c # controls` as above for the mixer names
+; Default: none
+;;headphone-id = 9
+
+; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear
+; Default: false
+;;mapped = true
+
+; Interval for volume increase/decrease (in percent points)
+; Default: 5
+;;interval = 5
+
+; Available tags:
+;   <label-volume> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-volume = <ramp-volume> <label-volume>
+
+; Available tags:
+;   <label-muted> (default)
+;   <ramp-volume>
+;   <bar-volume>
+;format-muted = <label-muted>
+
+; Available tokens:
+;   %percentage% (default)
+label-volume = %percentage%%
+
+; Available tokens:
+;   %percentage% (default
+format-muted-prefix = 
+label-muted = " Muted"
+label-muted-foreground = ${color.ac}
+
+; Only applies if <ramp-volume> is used
+ramp-volume-0 = 
+ramp-volume-1 = 
+ramp-volume-2 = 
+ramp-volume-3 = 
+ramp-volume-4 = 
+
+; If defined, it will replace <ramp-volume> when
+; headphones are plugged in to `headphone_control_numid`
+; If undefined, <ramp-volume> will be used for both
+; Only applies if <ramp-volume> is used
+ramp-headphones-0 = 
+ramp-headphones-1 = 
+
+;; Other Icons
+;						
+;		
+;
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/backlight]
+type = internal/xbacklight
+
+; Use the following command to list available cards:
+; $ ls -1 /sys/class/backlight/
+card = intel_backlight
+
+; Available tags:
+;   <label> (default)
+;   <ramp>
+;   <bar>
+format = <ramp> <label>
+
+; Available tokens:
+;   %percentage% (default)
+label = %percentage%%
+
+; Only applies if <ramp> is used
+
+ramp-0 = 
+ramp-1 = 
+ramp-2 = 
+ramp-3 = 
+ramp-4 = 
+
+;; Other Icons
+;
+
+; Only applies if <bar> is used
+;;bar-width = 10
+;;bar-indicator = |
+;;bar-fill = ─
+;;bar-empty = ─
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/battery]
+type = internal/battery
+
+; This is useful in case the battery never reports 100% charge
+full-at = 99
+
+; Use the following command to list batteries and adapters:
+; $ ls -1 /sys/class/power_supply/
+battery = BAT0
+adapter = ACAD
+
+; If an inotify event haven't been reported in this many
+; seconds, manually poll for new values.
+;
+; Needed as a fallback for systems that don't report events
+; on sysfs/procfs.
+;
+; Disable polling by setting the interval to 0.
+;
+; Default: 5
+poll-interval = 2
+
+; see "man date" for details on how to format the time string
+; NOTE: if you want to use syntax tags here you need to use %%{...}
+; Default: %H:%M:%S
+time-format = %H:%M
+
+; Available tags:
+;   <label-charging> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;   <animation-charging>
+format-charging = <animation-charging> <label-charging>
+format-charging-prefix = 
+; Available tags:
+;   <label-discharging> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;   <animation-discharging>
+format-discharging = <ramp-capacity> <label-discharging>
+
+; Available tags:
+;   <label-full> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;format-full = <ramp-capacity> <label-full>
+
+; Available tokens:
+;   %percentage% (default)
+;   %time%
+;   %consumption% (shows current charge rate in watts)
+
+label-charging = %percentage%%
+
+; Available tokens:
+;   %percentage% (default)
+;   %time%
+;   %consumption% (shows current discharge rate in watts)
+label-discharging = %percentage%%
+
+; Available tokens:
+;   %percentage% (default)
+label-full = Fully Charged
+
+; Only applies if <ramp-capacity> is used
+ramp-capacity-0 = 
+ramp-capacity-1 = 
+ramp-capacity-2 = 
+ramp-capacity-3 = 
+ramp-capacity-4 = 
+ramp-capacity-5 = 
+ramp-capacity-6 = 
+ramp-capacity-7 = 
+ramp-capacity-8 = 
+ramp-capacity-9 = 
+
+; Only applies if <bar-capacity> is used
+;bar-capacity-width = 10
+
+; Only applies if <animation-charging> is used
+animation-charging-0 = 
+animation-charging-1 = 
+animation-charging-2 = 
+animation-charging-3 = 
+animation-charging-4 = 
+animation-charging-5 = 
+animation-charging-6 = 
+animation-charging-7 = 
+animation-charging-8 = 
+
+; Framerate in milliseconds
+animation-charging-framerate = 750
+
+; Only applies if <animation-discharging> is used
+;;animation-discharging-0 = 
+;;animation-discharging-1 = 
+;;animation-discharging-2 = 
+;;animation-discharging-3 = 
+;;animation-discharging-4 = 
+;;animation-discharging-5 = 
+;;animation-discharging-6 = 
+;;animation-discharging-7 = 
+;;animation-discharging-8 = 
+
+; Framerate in milliseconds
+;animation-discharging-framerate = 500
+
+;; Other Icons
+;					
+;
+;	
+;
+;
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;;[module/bspwm]
+;;type = internal/bspwm
+
+; Only show workspaces defined on the same output as the bar
+; NOTE: The bspwm and XRandR monitor names must match, which they do by default.
+; Default: true
+;;pin-workspaces = true
+
+; Output mode flags after focused state label
+; Default: false
+;;inline-mode = false
+
+; Create click handler used to focus workspace
+; Default: true
+;;enable-click = false
+
+; Create scroll handlers used to cycle workspaces
+; Default: true
+;;enable-scroll = false
+
+; Set the scroll cycle direction 
+; Default: true
+;;reverse-scroll = false
+
+; Use fuzzy (partial) matching on labels when assigning 
+; icons to workspaces
+; Example: code;♚ will apply the icon to all workspaces 
+; containing 'code' in the label
+; Default: false
+;;fuzzy-match = true
+
+; ws-icon-[0-9]+ = label;icon
+; Note that the label needs to correspond with the bspwm workspace name
+;;ws-icon-0 = code;♚
+;;ws-icon-1 = office;♛
+;;ws-icon-2 = graphics;♜
+;;ws-icon-3 = mail;♝
+;;ws-icon-4 = web;♞
+;;ws-icon-default = ♟
+
+; Available tags:
+;   <label-monitor>
+;   <label-state> - gets replaced with <label-(focused|urgent|occupied|empty)>
+;   <label-mode> - gets replaced with <label-(monocle|tiled|fullscreen|floating|locked|sticky|private)>
+; Default: <label-state>
+;;format = <label-state> <label-mode>
+
+; Available tokens:
+;   %name%
+; Default: %name%
+;;label-monitor = %name%
+
+; If any values for label-dimmed-N are defined, the workspace/mode
+; colors will get overridden with those values if the monitor is out of focus
+; To only override workspaces in a specific state, use:
+;   label-dimmed-focused
+;   label-dimmed-occupied
+;   label-dimmed-urgent
+;   label-dimmed-empty
+;;label-dimmed-foreground = #555
+;;label-dimmed-underline = ${bar/top.background}
+;;label-dimmed-focused-background = #f00
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+;;label-focused = %icon%
+;;label-focused-foreground = #ffffff
+;;label-focused-background = #3f3f3f
+;;label-focused-underline = #fba922
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+;;label-occupied = %icon%
+;;label-occupied-underline = #555555
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+;;label-urgent = %icon%
+;;label-urgent-foreground = #000000
+;;label-urgent-background = #bd2c40
+;;label-urgent-underline = #9b0a20
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+;;label-empty = %icon%
+;;label-empty-foreground = #55
+
+; The following labels will be used to indicate the layout/mode
+; for the focused workspace. Requires <label-mode>
+;
+; Available tokens:
+;   None
+;label-monocle = 
+;label-tiled = 
+;label-fullscreen = 
+;label-floating = 
+;label-pseudotiled = P
+;label-locked = 
+;label-locked-foreground = #bd2c40
+;label-sticky = 
+;label-sticky-foreground = #fba922
+;label-private = 
+;label-private-foreground = #bd2c40
+
+; Separator in between workspaces
+;;label-separator = |
+;;label-separator-padding = 2
+;;label-separator-foreground = #ffb52a
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/cpu]
+type = internal/cpu
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 0.5
+
+; Available tags:
+;   <label> (default)
+;   <bar-load>
+;   <ramp-load>
+;   <ramp-coreload>
+;;format = <label> <ramp-coreload>
+format = <label> <ramp-load>
+format-prefix = 
+
+; Available tokens:
+;   %percentage% (default) - total cpu load averaged over all cores
+;   %percentage-sum% - Cumulative load on all cores
+;   %percentage-cores% - load percentage for each core
+;   %percentage-core[1-9]% - load percentage for specific core
+label = " %percentage%%"
+
+; Spacing between individual per-core ramps
+;;ramp-coreload-spacing = 1
+;;ramp-coreload-0 = 
+;;ramp-coreload-1 = 
+;;ramp-coreload-2 = 
+;;ramp-coreload-3 = 
+;;ramp-coreload-4 = 
+
+ramp-load-0 = 
+ramp-load-1 = 
+ramp-load-2 = 
+ramp-load-3 = 
+ramp-load-4 = 
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/date]
+type = internal/date
+
+; Seconds to sleep between updates
+interval = 1.0
+
+; See "http://en.cppreference.com/w/cpp/io/manip/put_time" for details on how to format the date string
+; NOTE: if you want to use syntax tags here you need to use %%{...}
+;;date = %Y-%m-%d%
+
+; Optional time format
+time =  %I:%M %p
+
+; if `date-alt` or `time-alt` is defined, clicking
+; the module will toggle between formats
+;;date-alt = %A, %d %B %Y
+time-alt =  %Y-%m-%d%
+
+; Available tags:
+;   <label> (default)
+format = <label>
+
+; Available tokens:
+;   %date%
+;   %time%
+; Default: %date%
+label = %time%
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/filesystem]
+type = internal/fs
+
+; Mountpoints to display
+mount-0 = /
+mount-1 = /home
+;;mount-2 = /var
+
+; Seconds to sleep between updates
+; Default: 30
+interval = 10
+
+; Display fixed precision values
+; Default: false
+fixed-values = true
+
+; Spacing between entries
+; Default: 2
+;;spacing = 4
+
+; Available tags:
+;   <label-mounted> (default)
+;   <bar-free>
+;   <bar-used>
+;   <ramp-capacity>
+format-mounted = <label-mounted>
+format-mounted-prefix = 
+
+; Available tags:
+;   <label-unmounted> (default)
+format-unmounted = <label-unmounted>
+format-unmounted-prefix = 
+
+; Available tokens:
+;   %mountpoint%
+;   %type%
+;   %fsname%
+;   %percentage_free%
+;   %percentage_used%
+;   %total%
+;   %free%
+;   %used%
+; Default: %mountpoint% %percentage_free%%
+label-mounted = " %free%"
+
+; Available tokens:
+;   %mountpoint%
+; Default: %mountpoint% is not mounted
+label-unmounted = %mountpoint%: not mounted
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;;[module/github]
+;;type = internal/github
+
+; Accessing an access token stored in file
+;;token = ${file:/path/to/file/containing/github/access.token}
+
+; Accessing an access token stored in an environment variable
+;;token = ${env:GITHUB_ACCESS_TOKEN}
+
+; Whether empty notifications should be displayed or not
+;;empty-notifications = false
+
+; Number of seconds in between requests
+;;interval = 10
+
+; Available tags:
+;   <label> (default)
+;;format = <label>
+
+; Available tokens:
+;   %notifications% (default)
+; Default: Notifications: %notifications%
+;;label = %notifications%
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;;[module/i3]
+;;type = internal/i3
+
+; Only show workspaces defined on the same output as the bar
+;
+; Useful if you want to show monitor specific workspaces
+; on different bars
+;
+; Default: false
+;;pin-workspaces = true
+
+; This will split the workspace name on ':'
+; Default: false
+;;strip-wsnumbers = true
+
+; Sort the workspaces by index instead of the default
+; sorting that groups the workspaces by output
+; Default: false
+;;index-sort = true
+
+; Create click handler used to focus workspace
+; Default: true
+;;enable-click = false
+
+; Create scroll handlers used to cycle workspaces
+; Default: true
+;;enable-scroll = false
+
+; Wrap around when reaching the first/last workspace
+; Default: true
+;;wrapping-scroll = false
+
+; Set the scroll cycle direction 
+; Default: true
+;;reverse-scroll = false
+
+; Use fuzzy (partial) matching on labels when assigning 
+; icons to workspaces
+; Example: code;♚ will apply the icon to all workspaces 
+; containing 'code' in the label
+; Default: false
+;;fuzzy-match = true
+
+; ws-icon-[0-9]+ = label;icon
+; NOTE: The label needs to match the name of the i3 workspace
+;;ws-icon-0 = 1;♚
+;;ws-icon-1 = 2;♛
+;;ws-icon-2 = 3;♜
+;;ws-icon-3 = 4;♝
+;;ws-icon-4 = 5;♞
+;;ws-icon-default = ♟
+; NOTE: You cannot skip icons, e.g. to get a ws-icon-6
+; you must also define a ws-icon-5.
+
+; Available tags:
+;   <label-state> (default) - gets replaced with <label-(focused|unfocused|visible|urgent)>
+;   <label-mode> (default)
+;;format = <label-state> <label-mode>
+
+; Available tokens:
+;   %mode%
+; Default: %mode%
+;;label-mode = %mode%
+;;label-mode-padding = 2
+;;label-mode-background = #e60053
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+;   %output%
+; Default: %icon%  %name%
+;;label-focused = %index%
+;;label-focused-foreground = #ffffff
+;;label-focused-background = #3f3f3f
+;;label-focused-underline = #fba922
+;;label-focused-padding = 4
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+;   %output%
+; Default: %icon%  %name%
+;;label-unfocused = %index%
+;;label-unfocused-padding = 4
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+;   %output%
+; Default: %icon%  %name%
+;;label-visible = %index%
+;;label-visible-underline = #555555
+;;label-visible-padding = 4
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+;   %output%
+; Default: %icon%  %name%
+;;label-urgent = %index%
+;;label-urgent-foreground = #000000
+;;label-urgent-background = #bd2c40
+;;label-urgent-padding = 4
+
+; Separator in between workspaces
+;;label-separator = |
+;;label-separator-padding = 2
+;;label-separator-foreground = #ffb52a
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/memory]
+type = internal/memory
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 3
+
+; Available tags:
+;   <label> (default)
+;   <bar-used>
+;   <bar-free>
+;   <ramp-used>
+;   <ramp-free>
+;   <bar-swap-used>
+;   <bar-swap-free>
+;   <ramp-swap-used>
+;   <ramp-swap-free>
+format = <label>
+format-prefix = 
+; Available tokens:
+;   %percentage_used% (default)
+;   %percentage_free%
+;   %gb_used%
+;   %gb_free%
+;   %gb_total%
+;   %mb_used%
+;   %mb_free%
+;   %mb_total%
+;   %percentage_swap_used%
+;   %percentage_swap_free%
+;   %mb_swap_total%
+;   %mb_swap_free%
+;   %mb_swap_used%
+;   %gb_swap_total%
+;   %gb_swap_free%
+;   %gb_swap_used%
+
+label = " %mb_used%"
+
+; Only applies if <bar-used> is used
+;;bar-used-indicator =
+;;bar-used-width = 50
+;;bar-used-foreground-0 = #55aa55
+;;bar-used-foreground-1 = #557755
+;;bar-used-foreground-2 = #f5a70a
+;;bar-used-foreground-3 = #ff5555
+;;bar-used-fill = ▐
+;;bar-used-empty = ▐
+;;bar-used-empty-foreground = #444444
+
+; Only applies if <ramp-used> is used
+;;ramp-used-0 = 
+;;ramp-used-1 = 
+;;ramp-used-2 = 
+;;ramp-used-3 = 
+;;ramp-used-4 = 
+
+; Only applies if <ramp-free> is used
+;;ramp-free-0 = 
+;;ramp-free-1 = 
+;;ramp-free-2 = 
+;;ramp-free-3 = 
+;;ramp-free-4 = 
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/mpd]
+type = internal/mpd
+
+; Host where mpd is running (either ip or domain name)
+; Can also be the full path to a unix socket where mpd is running.
+;;host = 127.0.0.1
+;;port = 6600
+;;password = mysecretpassword
+
+; Seconds to sleep between progressbar/song timer sync
+; Default: 1
+interval = 2
+
+; Available tags:
+;   <label-song> (default)
+;   <label-time>
+;   <bar-progress>
+;   <toggle> - gets replaced with <icon-(pause|play)>
+;   <toggle-stop> - gets replaced with <icon-(stop|play)>
+;   <icon-random>
+;   <icon-repeat>
+;   <icon-repeatone> (deprecated)
+;   <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone>
+;   <icon-consume>
+;   <icon-prev>
+;   <icon-stop>
+;   <icon-play>
+;   <icon-pause>
+;   <icon-next>
+;   <icon-seekb>
+;   <icon-seekf>
+format-online =  <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>
+
+;format-playing = ${self.format-online}
+;format-paused = ${self.format-online}
+;format-stopped = ${self.format-online}
+
+; Available tags:
+;   <label-offline>
+;format-offline = <label-offline>
+
+; Available tokens:
+;   %artist%
+;   %album-artist%
+;   %album%
+;   %date%
+;   %title%
+; Default: %artist% - %title%
+label-song =  "%artist% - %title%"
+label-song-maxlen = 25
+label-song-ellipsis = true
+
+; Available tokens:
+;   %elapsed%
+;   %total%
+; Default: %elapsed% / %total%
+;;abel-time = %elapsed% / %total%
+
+; Available tokens:
+;   None
+label-offline = "MPD is offline"
+
+; Only applies if <icon-X> is used
+icon-play = 
+icon-pause = 
+icon-stop = 
+icon-prev = 
+icon-next = 
+icon-seekb = ⏪
+icon-seekf = ⏩
+icon-random = 🔀
+icon-repeat = 🔁
+icon-repeatone = 🔂
+icon-single = 🔂
+icon-consume = ✀
+
+; Used to display the state of random/repeat/repeatone/single
+; Only applies if <icon-[random|repeat|repeatone|single]> is used
+;;toggle-on-foreground = #ff
+;;toggle-off-foreground = #55
+
+; Only applies if <bar-progress> is used
+;;bar-progress-width = 45
+;;bar-progress-indicator = |
+;;bar-progress-fill = ─
+;;bar-progress-empty = ─
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+; If you use both a wired and a wireless network, just add 2 module definitions. For example
+;;[module/wired-network]
+;;type = internal/network
+;;interface = eth0
+;;
+;;[module/wireless-network]
+;;type = internal/network
+;;interface = wlp3s0
+
+; Normal Module
+[module/network]
+type = internal/network
+interface = wlan0
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 1.0
+
+; Test connectivity every Nth update
+; A value of 0 disables the feature
+; NOTE: Experimental (needs more testing)
+; Default: 0
+;ping-interval = 3
+
+; @deprecated: Define min width using token specifiers (%downspeed:min% and %upspeed:min%)
+; Minimum output width of upload/download rate
+; Default: 3
+;;udspeed-minwidth = 5
+
+; Accumulate values from all interfaces
+; when querying for up/downspeed rate
+; Default: false
+accumulate-stats = true
+
+; Consider an `UNKNOWN` interface state as up.
+; Some devices have an unknown state, even when they're running
+; Default: false
+unknown-as-up = true
+
+; Available tags:
+;   <label-connected> (default)
+;   <ramp-signal>
+format-connected = <ramp-signal> <label-connected>
+
+; Available tags:
+;   <label-disconnected> (default)
+format-disconnected = <label-disconnected>
+
+; Available tags:
+;   <label-connected> (default)
+;   <label-packetloss>
+;   <animation-packetloss>
+;;format-packetloss = <animation-packetloss> <label-connected>
+
+; Available tokens:
+;   %ifname%    [wireless+wired]
+;   %local_ip%  [wireless+wired]
+;   %local_ip6% [wireless+wired]
+;   %essid%     [wireless]
+;   %signal%    [wireless]
+;   %upspeed%   [wireless+wired]
+;   %downspeed% [wireless+wired]
+;   %linkspeed% [wired]
+; Default: %ifname% %local_ip%
+label-connected = "%essid% %downspeed:8% %upspeed:8%"
+;;label-connected-foreground = #eefafafa
+
+; Available tokens:
+;   %ifname%    [wireless+wired]
+; Default: (none)
+label-disconnected =  "Not Connected"
+;;label-disconnected-foreground = #66ffffff
+
+; Available tokens:
+;   %ifname%    [wireless+wired]
+;   %local_ip%  [wireless+wired]
+;   %local_ip6% [wireless+wired]
+;   %essid%     [wireless]
+;   %signal%    [wireless]
+;   %upspeed%   [wireless+wired]
+;   %downspeed% [wireless+wired]
+;   %linkspeed% [wired]
+; Default: (none)
+;label-packetloss = %essid%
+;label-packetloss-foreground = #eefafafa
+
+; Only applies if <ramp-signal> is used
+ramp-signal-0 = 
+ramp-signal-1 = 
+ramp-signal-2 = 
+ramp-signal-3 = 
+ramp-signal-4 = 
+
+; Only applies if <animation-packetloss> is used
+;;animation-packetloss-0 = ⚠
+;;animation-packetloss-0-foreground = #ffa64c
+;;animation-packetloss-1 = ⚠
+;;animation-packetloss-1-foreground = #000000
+; Framerate in milliseconds
+;;animation-packetloss-framerate = 500
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/pulseaudio]
+type = internal/pulseaudio
+
+; Sink to be used, if it exists (find using `pacmd list-sinks`, name field)
+; If not, uses default sink
+sink = alsa_output.pci-0000_12_00.3.analog-stereo
+
+; Use PA_VOLUME_UI_MAX (~153%) if true, or PA_VOLUME_NORM (100%) if false
+; Default: true
+use-ui-max = true
+
+; Interval for volume increase/decrease (in percent points)
+; Default: 5
+interval = 5
+
+; Available tags:
+;   <label-volume> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-volume = <ramp-volume> <label-volume>
+
+; Available tags:
+;   <label-muted> (default)
+;   <ramp-volume>
+;   <bar-volume>
+;format-muted = <label-muted>
+
+; Available tokens:
+;   %percentage% (default)
+;label-volume = %percentage%%
+
+; Available tokens:
+;   %percentage% (default)
+label-muted =  Muted
+label-muted-foreground = #666
+
+; Only applies if <ramp-volume> is used
+ramp-volume-0 = 
+ramp-volume-1 = 
+ramp-volume-2 = 
+ramp-volume-3 = 
+ramp-volume-4 = 
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/temperature]
+type = internal/temperature
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 0.5
+
+; Thermal zone to use
+; To list all the zone types, run 
+; $ for i in /sys/class/thermal/thermal_zone*; do echo "$i: $(<$i/type)"; done
+; Default: 0
+thermal-zone = 0
+
+; Full path of temperature sysfs path
+; Use `sensors` to find preferred temperature source, then run
+; $ for i in /sys/class/hwmon/hwmon*/temp*_input; do echo "$(<$(dirname $i)/name): $(cat ${i%_*}_label 2>/dev/null || echo $(basename ${i%_*})) $(readlink -f $i)"; done
+; to find path to desired file
+; Default reverts to thermal zone setting
+;;hwmon-path = /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp1_input
+
+; Threshold temperature to display warning label (in degrees celsius)
+; Default: 80
+warn-temperature = 60
+
+; Whether or not to show units next to the temperature tokens (°C, °F)
+; Default: true
+units = true
+
+; Available tags:
+;   <label> (default)
+;   <ramp>
+format = <ramp> <label>
+
+; Available tags:
+;   <label-warn> (default)
+;   <ramp>
+format-warn = <ramp> <label-warn>
+
+; Available tokens:
+;   %temperature% (deprecated)
+;   %temperature-c%   (default, temperature in °C)
+;   %temperature-f%   (temperature in °F)
+label = %temperature-c%
+
+; Available tokens:
+;   %temperature% (deprecated)
+;   %temperature-c%   (default, temperature in °C)
+;   %temperature-f%   (temperature in °F)
+label-warn = "%temperature-c%"
+label-warn-foreground = #f00
+
+; Requires the <ramp> tag
+; The icon selection will range from 0 to `warn-temperature`
+; with the current temperature as index.
+ramp-0 = 
+ramp-1 = 
+ramp-2 = 
+ramp-3 = 
+ramp-4 = 
+;;ramp-foreground = #55
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/keyboard]
+type = internal/xkeyboard
+
+; List of indicators to ignore
+blacklist-0 = num lock
+blacklist-1 = scroll lock
+
+; Available tags:
+;   <label-layout> (default)
+;   <label-indicator> (default)
+format =  <label-layout> <label-indicator>
+;;format-spacing = 0
+
+; Available tokens:
+;   %layout%
+;   %name%
+;   %number%
+; Default: %layout%
+label-layout = %layout%
+;;label-layout-padding = 2
+;;label-layout-background = #bc99ed
+;;label-layout-foreground = #000
+
+; Available tokens:
+;   %name%
+; Default: %name%
+label-indicator = %name%
+;;label-indicator-padding = 2
+label-indicator-foreground = ${color.ac}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/title]
+type = internal/xwindow
+
+; Available tags:
+;   <label> (default)
+format = <label>
+;;format-background = ${color.bg}
+;;format-foreground = ${color.ac}
+;;format-padding = 4
+
+; Available tokens:
+;   %title%
+; Default: %title%
+label = %title%
+label-maxlen = 30
+
+; Used instead of label when there is no window title
+; Available tokens:
+;   None
+;;label-empty = Arch Linux
+;;label-empty-foreground = #707880
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/workspaces]
+type = internal/xworkspaces
+
+; Only show workspaces defined on the same output as the bar
+;
+; Useful if you want to show monitor specific workspaces
+; on different bars
+;
+; Default: false
+pin-workspaces = true
+
+; Create click handler used to focus desktop
+; Default: true
+enable-click = true
+
+; Create scroll handlers used to cycle desktops
+; Default: true
+enable-scroll = true
+
+; icon-[0-9]+ = <desktop-name>;<icon>
+; NOTE: The desktop name needs to match the name configured by the WM
+; You can get a list of the defined desktops using:
+; $ xprop -root _NET_DESKTOP_NAMES
+icon-0 = TTY;
+icon-1 = WEB;
+icon-2 = LAB;
+icon-3 = MED;
+;icon-4 = 5;
+icon-default = 
+
+; Available tags:
+;   <label-monitor>
+;   <label-state> - gets replaced with <label-(active|urgent|occupied|empty)>
+; Default: <label-state>
+format = <label-state>
+format-padding = 0
+
+; Available tokens:
+;   %name%
+; Default: %name%
+label-monitor = %name%
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+label-active = %name% %icon%
+label-active-foreground = ${color.ac}
+label-active-background = ${color.bg}
+;;label-active-underline = ${color.ac}
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+label-occupied = %icon%
+label-occupied-underline = ${color.fg}
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+label-urgent = %icon%
+label-urgent-foreground = ${color.red}
+label-urgent-background = ${color.bg}
+;;label-urgent-underline = ${color.red}
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+label-empty = %icon%
+label-empty-foreground = ${color.fg}
+
+label-active-padding = 1
+label-urgent-padding = 1
+label-occupied-padding = 1
+label-empty-padding = 1
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+;;	    __________  ______
+;;	   / ____/ __ \/ ____/
+;;	  / __/ / / / / /_    
+;;	 / /___/ /_/ / __/    
+;;	/_____/\____/_/       
+;;
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
diff --git a/.config/polybar/scripts/check-network b/.config/polybar/scripts/check-network
index c58ae66..ae000d6 100755
--- a/.config/polybar/scripts/check-network
+++ b/.config/polybar/scripts/check-network
@@ -1,9 +1,12 @@
 #!/usr/bin/env bash
 
 count=0
-disconnected=""
-wireless_connected=""
-ethernet_connected=""
+disconnected=""
+disconnected2=""
+disconnected3=""
+disconnected4=""
+wireless_connected=""
+ethernet_connected=""
 
 ID="$(ip link | awk '/state UP/ {print $2}')"
 
@@ -16,5 +19,8 @@ while true; do
         fi
     else
         echo "$disconnected" ; sleep 0.5
+        echo "$disconnected2" ; sleep 0.5
+        echo "$disconnected3" ; sleep 0.5
+        echo "$disconnected4" ; sleep 0.5
     fi
 done
diff --git a/.config/polybar/scripts/launcher b/.config/polybar/scripts/launcher
new file mode 100755
index 0000000..789ec08
--- /dev/null
+++ b/.config/polybar/scripts/launcher
@@ -0,0 +1,5 @@
+#!/bin/bash
+
+## Created By Aditya Shakya
+
+rofi -modi run,drun -show drun -location 1 -xoffset 10 -yoffset 32 -line-padding 4 -columns 1 -width 20 -lines 10 -padding 25 -hide-scrollbar -show-icons -drun-icon-theme "Papirus" -font "Misc Termsyn 12"
diff --git a/.config/polybar/scripts/launcher-alt b/.config/polybar/scripts/launcher-alt
new file mode 100755
index 0000000..066931f
--- /dev/null
+++ b/.config/polybar/scripts/launcher-alt
@@ -0,0 +1,5 @@
+#!/bin/bash
+
+## Created By Aditya Shakya
+
+rofi -modi run,drun -show drun -line-padding 4 -columns 2 -width 40 -padding 30 -hide-scrollbar -show-icons -drun-icon-theme "Papirus" -font "Misc Termsyn 12"
diff --git a/.config/polybar/scripts/launcher-full b/.config/polybar/scripts/launcher-full
new file mode 100755
index 0000000..f477dc0
--- /dev/null
+++ b/.config/polybar/scripts/launcher-full
@@ -0,0 +1,5 @@
+#!/bin/bash
+
+## Created By Aditya Shakya
+
+rofi -show run -fullscreen True -lines 5 -line-margin 5 -padding 300 -bw 0 -font "Misc Termsyn 12"
diff --git a/.config/polybar/scripts/lupdates b/.config/polybar/scripts/lupdates
new file mode 100755
index 0000000..76a54d0
--- /dev/null
+++ b/.config/polybar/scripts/lupdates
@@ -0,0 +1,3 @@
+#!/bin/bash
+
+termite -e "sudo pacman -Syu"
diff --git a/.config/polybar/scripts/powermenu b/.config/polybar/scripts/powermenu
new file mode 100755
index 0000000..d5a73b4
--- /dev/null
+++ b/.config/polybar/scripts/powermenu
@@ -0,0 +1,11 @@
+#!/bin/bash
+
+## Created By Aditya Shakya
+
+MENU="$(rofi -sep "|" -dmenu -i -p 'System' -location 3 -yoffset 32 -xoffset -10 -width 12 -hide-scrollbar -line-padding 4 -padding 20 -lines 4 -font "Misc Termsyn 12" <<< " Lock| Logout| Reboot| Shutdown")"
+            case "$MENU" in
+                *Lock) i3lock-fancy ;;
+                *Logout) openbox --exit;;
+                *Reboot) systemctl reboot ;;
+                *Shutdown) systemctl -i poweroff
+            esac
diff --git a/.config/polybar/scripts/powermenu-alt b/.config/polybar/scripts/powermenu-alt
new file mode 100755
index 0000000..c9cdad7
--- /dev/null
+++ b/.config/polybar/scripts/powermenu-alt
@@ -0,0 +1,11 @@
+#!/bin/bash
+
+## Created By Aditya Shakya
+
+MENU="$(rofi -sep "|" -dmenu -i -p 'System' -width 12 -hide-scrollbar -line-padding 4 -padding 20 -lines 4 -font "Misc Termsyn 12" <<< " Lock| Logout| Reboot| Shutdown")"
+            case "$MENU" in
+                *Lock) i3lock-fancy ;;
+                *Logout) openbox --exit;;
+                *Reboot) systemctl reboot ;;
+                *Shutdown) systemctl -i poweroff
+            esac
diff --git a/.config/polybar/scripts/updates.sh b/.config/polybar/scripts/updates.sh
index 6ea417d..3e06f26 100755
--- a/.config/polybar/scripts/updates.sh
+++ b/.config/polybar/scripts/updates.sh
@@ -1,6 +1,6 @@
 #!/usr/bin/env bash
 
-BAR_ICON=""
+BAR_ICON=""
 NOTIFY_ICON=/usr/share/icons/Papirus/32x32/apps/system-software-update.svg
 
 get_total_updates() { UPDATES=$(checkupdates 2>/dev/null | wc -l); }
@@ -26,9 +26,9 @@ while true; do
     # every 10 seconds another check for updates is done
     while (( UPDATES > 0 )); do
         if (( UPDATES == 1 )); then
-            echo " $UPDATES"
+            echo " $UPDATES Update"
         elif (( UPDATES > 1 )); then
-            echo " $UPDATES"
+            echo " $UPDATES Updates"
         else
             echo $BAR_ICON
         fi
diff --git a/.config/polybar/scripts/windows b/.config/polybar/scripts/windows
new file mode 100755
index 0000000..b35fd02
--- /dev/null
+++ b/.config/polybar/scripts/windows
@@ -0,0 +1,5 @@
+#!/bin/bash
+
+## Created By Aditya Shakya
+
+rofi -modi window -show window -hide-scrollbar -font "Misc Termsyn 12" -padding 20 -line-padding 4 -width 40 -lines 6
diff --git a/.config/polybar/user_modules.ini b/.config/polybar/user_modules.ini
new file mode 100644
index 0000000..ecbba8f
--- /dev/null
+++ b/.config/polybar/user_modules.ini
@@ -0,0 +1,290 @@
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+;;
+;;	   __  __                  __  ___          __      __         
+;;	  / / / /_______  _____   /  |/  /___  ____/ /_  __/ /__  _____
+;;	 / / / / ___/ _ \/ ___/  / /|_/ / __ \/ __  / / / / / _ \/ ___/
+;;	/ /_/ (__  )  __/ /     / /  / / /_/ / /_/ / /_/ / /  __(__  ) 
+;;	\____/____/\___/_/     /_/  /_/\____/\__,_/\__,_/_/\___/____/  
+;; 
+;; Created By Aditya Shakya @adi1090x
+;;
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/checknetwork]
+type = custom/script
+
+; Available tokens:
+;   %counter%
+; Command to be executed (using "/usr/bin/env sh -c [command]")
+exec = ~/.config/polybar/scripts/check-network
+
+; Conditional command that, if defined, needs to exit successfully
+; before the main exec command is invoked.
+; Default: ""
+;;exec-if = ""
+
+; Will the script output continous content?
+; Default: false
+tail = true
+
+; Seconds to sleep between updates
+; Default: 2 (0 if `tail = true`)
+interval = 5
+
+; Available tags:
+;   <output> - deprecated
+;   <label> (default)
+;;format = <label>
+;;format-background = #999
+;;format-foreground = #000
+;;format-padding = 4
+
+; Available tokens:
+;   %output%
+; Default: %output%
+;;label = %output:0:15:...%
+
+; Available tokens:
+;   %counter%
+;   %pid%
+;
+; "click-(left|middle|right)" will be executed using "/usr/bin/env sh -c [command]"
+click-left = networkmanager_dmenu &
+click-middle = networkmanager_dmenu &
+click-right = networkmanager_dmenu &
+;;double-click-left = echo double left %counter%
+;;double-click-middle = echo double middle %counter%
+;;double-click-right = echo double right %counter%
+
+; Available tokens:
+;   %counter%
+;   %pid%
+;
+; "scroll-(up|down)" will be executed using "/usr/bin/env sh -c [command]"
+;;scroll-up = echo scroll up %counter%
+;;scroll-down = echo scroll down %counter%
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/updates]
+type = custom/script
+
+; Available tokens:
+;   %counter%
+; Command to be executed (using "/usr/bin/env sh -c [command]")
+exec = ~/.config/polybar/scripts/updates.sh
+
+; Conditional command that, if defined, needs to exit successfully
+; before the main exec command is invoked.
+; Default: ""
+;;exec-if = ""
+
+; Will the script output continous content?
+; Default: false
+tail = true
+
+; Seconds to sleep between updates
+; Default: 2 (0 if `tail = true`)
+interval = 5
+
+; Available tags:
+;   <output> - deprecated
+;   <label> (default)
+;;format = <label>
+;;format-background = #999
+;;format-foreground = #000
+;;format-padding = 4
+
+; Available tokens:
+;   %output%
+; Default: %output%
+;;label = %output:0:15:...%
+
+; Available tokens:
+;   %counter%
+;   %pid%
+;
+; "click-(left|middle|right)" will be executed using "/usr/bin/env sh -c [command]"
+click-left = ~/.config/polybar/scripts/lupdates &
+;;click-middle = ~/.config/polybar/scripts/lupdates &
+;;click-right = ~/.config/polybar/scripts/lupdates &
+;;double-click-left = echo double left %counter%
+;;double-click-middle = echo double middle %counter%
+;;double-click-right = echo double right %counter%
+
+; Available tokens:
+;   %counter%
+;   %pid%
+;
+; "scroll-(up|down)" will be executed using "/usr/bin/env sh -c [command]"
+;;scroll-up = echo scroll up %counter%
+;;scroll-down = echo scroll down %counter%
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/window_switch]
+type = custom/text
+content =  Switch
+
+; "content" has the same properties as "format-NAME"
+;;content-background = #000
+;;content-foreground = #fff
+;;content-padding = 4
+
+; "click-(left|middle|right)" will be executed using "/usr/bin/env sh -c $COMMAND"
+click-left = skippy-xd
+click-middle = skippy-xd
+click-right = ~/.config/polybar/scripts/windows
+
+; "scroll-(up|down)" will be executed using "/usr/bin/env sh -c $COMMAND"
+;;scroll-up = skippy-xd
+;;scroll-down = skippy-xd
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/launcher]
+type = custom/text
+content = 
+
+; "content" has the same properties as "format-NAME"
+;;content-background = #000
+content-foreground = ${color.ac}
+;;content-padding = 4
+
+; "click-(left|middle|right)" will be executed using "/usr/bin/env sh -c $COMMAND"
+click-left = ~/.config/polybar/scripts/launcher
+;;click-middle = ~/.config/polybar/scripts/launcher-full
+click-right = ~/.config/polybar/scripts/launcher-alt
+
+; "scroll-(up|down)" will be executed using "/usr/bin/env sh -c $COMMAND"
+;;scroll-up = ~/.config/polybar/scripts/launcher-full
+scroll-down = ~/.config/polybar/scripts/launcher-full
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/sysmenu]
+type = custom/text
+content = 
+
+; "content" has the same properties as "format-NAME"
+;;content-background = #000
+content-foreground = ${color.ac}
+;;content-padding = 4
+
+; "click-(left|middle|right)" will be executed using "/usr/bin/env sh -c $COMMAND"
+click-left = ~/.config/polybar/scripts/powermenu
+;;click-middle = ~/.config/polybar/scripts/powermenu
+click-right = ~/.config/polybar/scripts/powermenu-alt
+
+; "scroll-(up|down)" will be executed using "/usr/bin/env sh -c $COMMAND"
+;;scroll-up = ~/.config/polybar/scripts/powermenu
+;;scroll-down = ~/.config/polybar/scripts/powermenu
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/powermenu]
+type = custom/menu
+
+; If true, <label-toggle> will be to the left of the menu items (default).
+; If false, it will be on the right of all the items.
+expand-right = true
+
+; "menu-LEVEL-N" has the same properties as "label-NAME" with
+; the additional "exec" property
+;
+; Available exec commands:
+;   menu-open-LEVEL
+;   menu-close
+; Other commands will be executed using "/usr/bin/env sh -c $COMMAND"
+menu-0-0 = reboot
+menu-0-0-exec = menu-open-1
+menu-0-1 = shutdown
+menu-0-1-exec = menu-open-2
+
+menu-1-0 = back
+menu-1-0-exec = menu-open-0
+menu-1-1 = reboot
+menu-1-1-exec = systemctl reboot
+
+menu-2-0 = shutdown
+menu-2-0-exec = systemctl poweroff
+menu-2-1 = back
+menu-2-1-exec = menu-open-0
+
+; Available tags:
+;   <label-toggle> (default) - gets replaced with <label-(open|close)>
+;   <menu> (default)
+; Note that if you use <label-toggle> you must also include
+; the definition for <label-open>
+
+;;format = <label-toggle> <menu>
+;;format-prefix = ${menu.icon-menu}
+format-spacing = 1 
+
+label-open = 
+label-close = 
+
+
+; Optional item separator
+; Default: none
+label-separator = |
+
+label-open-foreground = ${color.ac}
+label-close-foreground = ${color.ac}
+label-separator-foreground = ${color.ac}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/menu]
+type = custom/menu
+
+; If true, <label-toggle> will be to the left of the menu items (default).
+; If false, it will be on the right of all the items.
+expand-right = true
+
+; "menu-LEVEL-N" has the same properties as "label-NAME" with
+; the additional "exec" property
+;
+; Available exec commands:
+;   menu-open-LEVEL
+;   menu-close
+; Other commands will be executed using "/usr/bin/env sh -c $COMMAND"
+menu-0-0 = Menu
+menu-0-0-exec = ~/.config/polybar/scripts/launcher &
+menu-0-1 = Files
+menu-0-1-exec = thunar &
+menu-0-2 = Terminal
+menu-0-2-exec = termite &
+menu-0-3 = Browser
+menu-0-3-exec = firefox &
+
+; Available tags:
+;   <label-toggle> (default) - gets replaced with <label-(open|close)>
+;   <menu> (default)
+; Note that if you use <label-toggle> you must also include
+; the definition for <label-open>
+
+;;format = <label-toggle> <menu>
+;;format-prefix = ${menu.icon-menu}
+format-spacing = 1 
+
+label-open = 
+label-close = 
+
+
+; Optional item separator
+; Default: none
+label-separator = |
+
+label-open-foreground = ${color.ac}
+label-close-foreground = ${color.ac}
+label-separator-foreground = ${color.ac}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+;;	    __________  ______
+;;	   / ____/ __ \/ ____/
+;;	  / __/ / / / / /_    
+;;	 / /___/ /_/ / __/    
+;;	/_____/\____/_/       
+;;
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_