dotfiles/.config/polybar/modules.ini

1172 lines
27 KiB
INI
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;;
;; __ ___ __ __
;; / |/ /___ ____/ /_ __/ /__ _____
;; / /|_/ / __ \/ __ / / / / / _ \/ ___/
;; / / / / /_/ / /_/ / /_/ / / __(__ )
;; /_/ /_/\____/\__,_/\__,_/_/\___/____/
;;
;; Created By Aditya Shakya @adi1090x
;;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/alsa]
type = internal/alsa
; Soundcard to be used
; Usually in the format hw:# where # is the card number
; You can find the different card numbers in `/proc/asound/cards`
;;master-soundcard = default
;;speaker-soundcard = default
;;headphone-soundcard = default
; Name of the master, speaker and headphone mixers
; Use the following command to list available mixer controls:
; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p"
; If master, speaker or headphone-soundcard isn't the default,
; use `amixer -c # scontrols` instead where # is the number
; of the master, speaker or headphone soundcard respectively
;
; Default: Master
;;master-mixer = Master
; Optionally define speaker and headphone mixers
; Default: none
;;speaker-mixer = Speaker
; Default: none
;;headphone-mixer = Headphone
; NOTE: This is required if headphone_mixer is defined
; Use the following command to list available device controls
; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort
; You may also need to use `amixer -c # controls` as above for the mixer names
; Default: none
;;headphone-id = 9
; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear
; Default: false
;;mapped = true
; Interval for volume increase/decrease (in percent points)
; Default: 5
;;interval = 5
; Available tags:
; <label-volume> (default)
; <ramp-volume>
; <bar-volume>
format-volume = <ramp-volume> <label-volume>
; Available tags:
; <label-muted> (default)
; <ramp-volume>
; <bar-volume>
;format-muted = <label-muted>
; Available tokens:
; %percentage% (default)
label-volume = %percentage%%
; Available tokens:
; %percentage% (default
format-muted-prefix =
label-muted = " Muted"
label-muted-foreground = ${color.ac}
; Only applies if <ramp-volume> is used
ramp-volume-0 =
ramp-volume-1 =
ramp-volume-2 =
ramp-volume-3 =
ramp-volume-4 =
; If defined, it will replace <ramp-volume> when
; headphones are plugged in to `headphone_control_numid`
; If undefined, <ramp-volume> will be used for both
; Only applies if <ramp-volume> is used
ramp-headphones-0 =
ramp-headphones-1 =
;; Other Icons
;    
;  
;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/backlight]
type = internal/backlight
; Use the following command to list available cards:
; $ ls -1 /sys/class/backlight/
card = intel_backlight
; Available tags:
; <label> (default)
; <ramp>
; <bar>
format = <ramp> <bar>
; Available tokens:
; %percentage% (default)
label = %percentage%%
bar-format = "%fill%%indicator%%empty%"
bar-width = 10
bar-gradient = false
bar-indicator =
bar-indicator-foreground = ${color.fg}
bar-indicator-font = 4
# bar-fill = ▮
bar-fill =
bar-fill-font = 4
bar-foreground-0 = ${color.white}
bar-foreground-1 = ${color.white}
bar-foreground-2 = ${color.white}
bar-foreground-3 = ${color.white}
bar-foreground-4 = ${color.white}
# bar-empty = ▯
bar-empty =
bar-empty-font = 4
bar-empty-foreground = ${color.black}
; Only applies if <ramp> is used
ramp-0 =
ramp-1 =
ramp-2 =
ramp-3 =
ramp-4 =
ramp-foreground = ${color.yellow}
;; Other Icons
;
; Only applies if <bar> is used
;;bar-width = 10
;;bar-indicator = |
;;bar-fill = ─
;;bar-empty = ─
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/battery]
type = internal/battery
; This is useful in case the battery never reports 100% charge
full-at = 97
; Use the following command to list batteries and adapters:
; $ ls -1 /sys/class/power_supply/
battery = BAT0
adapter = ACAD
; If an inotify event haven't been reported in this many
; seconds, manually poll for new values.
;
; Needed as a fallback for systems that don't report events
; on sysfs/procfs.
;
; Disable polling by setting the interval to 0.
;
; Default: 5
poll-interval = 2
; see "man date" for details on how to format the time string
; NOTE: if you want to use syntax tags here you need to use %%{...}
; Default: %H:%M:%S
time-format = %H:%M
; Available tags:
; <label-charging> (default)
; <bar-capacity>
; <ramp-capacity>
; <animation-charging>
format-charging = <label-charging>
format-charging-prefix = " "
format-charging-prefix-foreground = ${color.blue}
; Available tags:
; <label-discharging> (default)
; <bar-capacity>
; <ramp-capacity>
; <animation-discharging>
format-discharging = <ramp-capacity> <label-discharging>
format-discharging-foreground = ${color.blue}
; Available tags:
; <label-full> (default)
; <bar-capacity>
; <ramp-capacity>
format-full = <label-full>
format-full-prefix = " "
format-full-prefix-foreground = ${color.blue}
; Available tokens:
; %percentage% (default)
; %time%
; %consumption% (shows current charge rate in watts)
label-charging = %percentage%%
; Available tokens:
; %percentage% (default)
; %time%
; %consumption% (shows current discharge rate in watts)
label-discharging = %percentage%%
label-discharging-foreground = ${color.white}
; Available tokens:
; %percentage% (default)
label-full = %percentage%%
; Only applies if <ramp-capacity> is used
ramp-capacity-0 =
ramp-capacity-1 =
ramp-capacity-2 =
ramp-capacity-3 =
ramp-capacity-4 =
ramp-capacity-5 =
ramp-capacity-6 =
ramp-capacity-7 =
ramp-capacity-8 =
ramp-capacity-9 =
; Only applies if <bar-capacity> is used
;bar-capacity-width = 10
; Only applies if <animation-charging> is used
animation-charging-0 =
animation-charging-1 =
animation-charging-2 =
animation-charging-3 =
animation-charging-4 =
animation-charging-5 =
animation-charging-6 =
animation-charging-7 =
animation-charging-8 =
; Framerate in milliseconds
animation-charging-framerate = 750
; Framerate in milliseconds
;animation-discharging-framerate = 500
;; Other Icons
;   
;
; 
;
;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;;[module/bspwm]
;;type = internal/bspwm
; Only show workspaces defined on the same output as the bar
; NOTE: The bspwm and XRandR monitor names must match, which they do by default.
; Default: true
;;pin-workspaces = true
;
; Output mode flags after focused state label
; Default: false
;;inline-mode = false
;
; Create click handler used to focus workspace
; Default: true
;;enable-click = false
;
; Create scroll handlers used to cycle workspaces
; Default: true
;;enable-scroll = false
;
; Set the scroll cycle direction
; Default: true
;;reverse-scroll = false
;
; Use fuzzy (partial) matching on labels when assigning
; icons to workspaces
; Example: code;♚ will apply the icon to all workspaces
; containing 'code' in the label
; Default: false
;;fuzzy-match = true
; ws-icon-[0-9]+ = label;icon
; Note that the label needs to correspond with the bspwm workspace name
;;ws-icon-0 = code;♚
;;ws-icon-1 = office;♛
;;ws-icon-2 = graphics;♜
;;ws-icon-3 = mail;♝
;;ws-icon-4 = web;♞
;;ws-icon-default = ♟
; Available tags:
; <label-monitor>
; <label-state> - gets replaced with <label-(focused|urgent|occupied|empty)>
; <label-mode> - gets replaced with <label-(monocle|tiled|fullscreen|floating|locked|sticky|private)>
; Default: <label-state>
;;format = <label-state> <label-mode>
; Available tokens:
; %name%
; Default: %name%
;;label-monitor = %name%
;
; If any values for label-dimmed-N are defined, the workspace/mode
; colors will get overridden with those values if the monitor is out of focus
; To only override workspaces in a specific state, use:
; label-dimmed-focused
; label-dimmed-occupied
; label-dimmed-urgent
; label-dimmed-empty
;;label-dimmed-foreground = #555
;;label-dimmed-underline = ${bar/top.background}
;;label-dimmed-focused-background = #f00
;
; Available tokens:
; %name%
; %icon%
; %index%
; Default: %icon% %name%
;;label-focused = %icon%
;;label-focused-foreground = #ffffff
;;label-focused-background = #3f3f3f
;;label-focused-underline = #fba922
; Available tokens:
; %name%
; %icon%
; %index%
; Default: %icon% %name%
;;label-occupied = %icon%
;;label-occupied-underline = #555555
; Available tokens:
; %name%
; %icon%
; %index%
; Default: %icon% %name%
;;label-urgent = %icon%
;;label-urgent-foreground = #000000
;;label-urgent-background = #bd2c40
;;label-urgent-underline = #9b0a20
; Available tokens:
; %name%
; %icon%
; %index%
; Default: %icon% %name%
;;label-empty = %icon%
;;label-empty-foreground = #55
; The following labels will be used to indicate the layout/mode
; for the focused workspace. Requires <label-mode>
;
; Available tokens:
; None
;;label-monocle = 
;;label-tiled = 
;;label-fullscreen = 
;;label-floating = 
;;label-pseudotiled = P
;;label-locked = 
;;label-locked-foreground = #bd2c40
;;label-sticky = 
;;label-sticky-foreground = #fba922
;;label-private = 
;;label-private-foreground = #bd2c40
;
; Separator in between workspaces
;;label-separator = |
;;label-separator-padding = 2
;;label-separator-foreground = #ffb52a
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/cpu]
type = internal/cpu
; Seconds to sleep between updates
; Default: 1
interval = 1
; Available tags:
; <label> (default)
; <bar-load>
; <ramp-load>
; <ramp-coreload>
;;format = <label> <ramp-coreload>
format = <label>
format-prefix = " "
format-prefix-foreground = ${color.dblue}
format-background = ${color.black}
; Available tokens:
; %percentage% (default) - total cpu load averaged over all cores
; %percentage-sum% - Cumulative load on all cores
; %percentage-cores% - load percentage for each core
; %percentage-core[1-9]% - load percentage for specific core
label = "%percentage%% "
; Spacing between individual per-core ramps
;;ramp-coreload-spacing = 1
;;ramp-coreload-0 = 
;;ramp-coreload-1 = 
;;ramp-coreload-2 = 
;;ramp-coreload-3 = 
;;ramp-coreload-4 = 
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/date]
type = internal/date
; Seconds to sleep between updates
interval = 30
; See "http://en.cppreference.com/w/cpp/io/manip/put_time" for details on how to format the date string
; NOTE: if you want to use syntax tags here you need to use %%{...}
;;date = %Y-%m-%d%
; Optional time format
time = %H:%M
; if `date-alt` or `time-alt` is defined, clicking
; the module will toggle between formats
;;date-alt = %A, %d %B %Y
time-alt =  %Y-%m-%d%
; Available tags:
; <label> (default)
format = "%{F#888e96} <label>%{F-}"
format-foreground = ${color.magenta}
format-background = ${color.black}
; Available tokens:
; %date%
; %time%
; Default: %date%
label = %time%
label-foreground = ${color.white}
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/filesystem]
type = internal/fs
; Mountpoints to display
mount-0 = /
; Seconds to sleep between updates
; Default: 30
interval = 10
; Display fixed precision values
; Default: false
fixed-values = true
; Spacing between entries
; Default: 2
spacing = 2
; Available tags:
; <label-mounted> (default)
; <bar-free>
; <bar-used>
; <ramp-capacity>
; This is bugged for the moment, a big space is printed between the label and the value
format-mounted = <label-mounted>
format-mounted-prefix = " "
format-mounted-prefix-foreground = ${color.dblue}
; Available tags:
; <label-unmounted> (default)
; This is bugged for the moment, a big space is printed between the label and the value
;format-unmounted = <label-unmounted>
;format-unmounted-prefix = 
; Available tokens:
; %mountpoint%
; %type%
; %fsname%
; %percentage_free%
; %percentage_used%
; %total%
; %free%
; %used%
; Default: %mountpoint% %percentage_free%%
label-mounted = %free%/%total%
; Available tokens:
; %mountpoint%
; Default: %mountpoint% is not mounted
label-unmounted = %mountpoint%: not mounted
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;;[module/github]
;;type = internal/github
; Accessing an access token stored in file
;;token = ${file:/path/to/file/containing/github/access.token}
; Accessing an access token stored in an environment variable
;;token = ${env:GITHUB_ACCESS_TOKEN}
; Whether empty notifications should be displayed or not
;;empty-notifications = false
; Number of seconds in between requests
;;interval = 10
; Available tags:
; <label> (default)
;;format = <label>
; Available tokens:
; %notifications% (default)
; Default: Notifications: %notifications%
;;label = %notifications%
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/workspaces]
type = internal/i3
; Only show workspaces defined on the same output as the bar
;
; Useful if you want to show monitor specific workspaces
; on different bars
;
; Default: false
pin-workspaces = true
; This will split the workspace name on ':'
; Default: false
strip-wsnumbers = true
; Sort the workspaces by index instead of the default
; sorting that groups the workspaces by output
; Default: false
index-sort = true
; Create click handler used to focus workspace
; Default: true
enable-click = true
; Create scroll handlers used to cycle workspaces
; Default: true
enable-scroll = false
; Wrap around when reaching the first/last workspace
; Default: true
wrapping-scroll = false
; Set the scroll cycle direction
; Default: true
reverse-scroll = false
; Use fuzzy (partial) matching on labels when assigning
; icons to workspaces
; Example: code;♚ will apply the icon to all workspaces
; containing 'code' in the label
; Default: false
fuzzy-match = true
; ws-icon-[0-9]+ = label;icon
; NOTE: The label needs to match the name of the i3 workspace
ws-icon-0 = 1;♚
ws-icon-1 = 2;♛
ws-icon-2 = 3;♜
ws-icon-3 = 4;♝
ws-icon-4 = 5;♞
ws-icon-default =
; NOTE: You cannot skip icons, e.g. to get a ws-icon-6
; you must also define a ws-icon-5.
; Available tags:
; <label-state> (default) - gets replaced with <label-(focused|unfocused|visible|urgent)>
; <label-mode> (default)
format = <label-state> <label-mode>
; Available tokens:
; %mode%
; Default: %mode%
label-mode = %mode%
label-mode-padding = 2
label-mode-background = #e60053
; Available tokens:
; %name%
; %icon%
; %index%
; %output%
; Default: %icon% %name%
label-focused = %index%
label-focused-foreground = ${color.fg}
label-focused-background = ${color.dblack}
label-focused-underline = ${color.magenta}
label-focused-padding = 4
; Available tokens:
; %name%
; %icon%
; %index%
; %output%
; Default: %icon% %name%
label-unfocused = %index%
label-unfocused-padding = 4
; Available tokens:
; %name%
; %icon%
; %index%
; %output%
; Default: %icon% %name%
label-visible = %index%
label-visible-padding = 4
; Available tokens:
; %name%
; %icon%
; %index%
; %output%
; Default: %icon% %name%
label-urgent = %index%
label-urgent-foreground = #000000
label-urgent-background = #bd2c40
label-urgent-padding = 4
; Separator in between workspaces
label-separator = |
label-separator-padding = 2
label-separator-foreground = ${color.magenta}
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/memory]
type = internal/memory
; Seconds to sleep between updates
; Default: 1
interval = 3
; Available tags:
; <label> (default)
; <bar-used>
; <bar-free>
; <ramp-used>
; <ramp-free>
; <bar-swap-used>
; <bar-swap-free>
; <ramp-swap-used>
; <ramp-swap-free>
format = <label>
format-prefix = "﬙"
format-prefix-foreground = ${color.green}
; Available tokens:
; %percentage_used% (default)
; %percentage_free%
; %gb_used%
; %gb_free%
; %gb_total%
; %mb_used%
; %mb_free%
; %mb_total%
; %percentage_swap_used%
; %percentage_swap_free%
; %mb_swap_total%
; %mb_swap_free%
; %mb_swap_used%
; %gb_swap_total%
; %gb_swap_free%
; %gb_swap_used%
label = " %mb_used% "
; Only applies if <bar-used> is used
;;bar-used-indicator =
;;bar-used-width = 50
;;bar-used-foreground-0 = #55aa55
;;bar-used-foreground-1 = #557755
;;bar-used-foreground-2 = #f5a70a
;;bar-used-foreground-3 = #ff5555
;;bar-used-fill = ▐
;;bar-used-empty = ▐
;;bar-used-empty-foreground = #444444
; Only applies if <ramp-used> is used
;;ramp-used-0 = 
;;ramp-used-1 = 
;;ramp-used-2 = 
;;ramp-used-3 = 
;;ramp-used-4 = 
; Only applies if <ramp-free> is used
;;ramp-free-0 = 
;;ramp-free-1 = 
;;ramp-free-2 = 
;;ramp-free-3 = 
;;ramp-free-4 = 
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/mpd]
type = internal/mpd
; Host where mpd is running (either ip or domain name)
; Can also be the full path to a unix socket where mpd is running.
;;host = 127.0.0.1
;;port = 6600
;;password = mysecretpassword
; Seconds to sleep between progressbar/song timer sync
; Default: 1
interval = 2
; Available tags:
; <label-song> (default)
; <label-time>
; <bar-progress>
; <toggle> - gets replaced with <icon-(pause|play)>
; <toggle-stop> - gets replaced with <icon-(stop|play)>
; <icon-random>
; <icon-repeat>
; <icon-repeatone> (deprecated)
; <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone>
; <icon-consume>
; <icon-prev>
; <icon-stop>
; <icon-play>
; <icon-pause>
; <icon-next>
; <icon-seekb>
; <icon-seekf>
format-online =  <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
;format-playing = ${self.format-online}
;format-paused = ${self.format-online}
;format-stopped = ${self.format-online}
; Available tags:
; <label-offline>
;format-offline = <label-offline>
; Available tokens:
; %artist%
; %album-artist%
; %album%
; %date%
; %title%
; Default: %artist% - %title%
label-song = "%artist% - %title%"
label-song-maxlen = 25
label-song-ellipsis = true
; Available tokens:
; %elapsed%
; %total%
; Default: %elapsed% / %total%
;;abel-time = %elapsed% / %total%
; Available tokens:
; None
label-offline = "MPD is offline"
; Only applies if <icon-X> is used
icon-play =
icon-pause =
icon-stop =
icon-prev =
icon-next =
icon-seekb =
icon-seekf =
icon-random = 🔀
icon-repeat = 🔁
icon-repeatone = 🔂
icon-single = 🔂
icon-consume =
; Used to display the state of random/repeat/repeatone/single
; Only applies if <icon-[random|repeat|repeatone|single]> is used
;;toggle-on-foreground = #ff
;;toggle-off-foreground = #55
; Only applies if <bar-progress> is used
;;bar-progress-width = 45
;;bar-progress-indicator = |
;;bar-progress-fill = ─
;;bar-progress-empty = ─
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
; If you use both a wired and a wireless network, just add 2 module definitions. For example
;;[module/wired-network]
;;type = internal/network
;;interface = eth0
;;
;;[module/wireless-network]
;;type = internal/network
;;interface = wlp3s0
; Normal Module
[module/network]
type = internal/network
interface = wlan0
; Seconds to sleep between updates
; Default: 1
interval = 1.0
; Test connectivity every Nth update
; A value of 0 disables the feature
; NOTE: Experimental (needs more testing)
; Default: 0
;ping-interval = 3
; @deprecated: Define min width using token specifiers (%downspeed:min% and %upspeed:min%)
; Minimum output width of upload/download rate
; Default: 3
;;udspeed-minwidth = 5
; Accumulate values from all interfaces
; when querying for up/downspeed rate
; Default: false
accumulate-stats = true
; Consider an `UNKNOWN` interface state as up.
; Some devices have an unknown state, even when they're running
; Default: false
unknown-as-up = true
; Available tags:
; <label-connected> (default)
; <ramp-signal>
format-connected = 直 <label-connected>
; Available tags:
; <label-disconnected> (default)
format-disconnected = <label-disconnected>
; Available tags:
; <label-connected> (default)
; <label-packetloss>
; <animation-packetloss>
;;format-packetloss = <animation-packetloss> <label-connected>
; Available tokens:
; %ifname% [wireless+wired]
; %local_ip% [wireless+wired]
; %local_ip6% [wireless+wired]
; %essid% [wireless]
; %signal% [wireless]
; %upspeed% [wireless+wired]
; %downspeed% [wireless+wired]
; %linkspeed% [wired]
; Default: %ifname% %local_ip%
label-connected = "%essid% %downspeed:8% %upspeed:8%"
;;label-connected-foreground = #eefafafa
; Available tokens:
; %ifname% [wireless+wired]
; Default: (none)
label-disconnected =  "Not Connected"
;;label-disconnected-foreground = #66ffffff
; Available tokens:
; %ifname% [wireless+wired]
; %local_ip% [wireless+wired]
; %local_ip6% [wireless+wired]
; %essid% [wireless]
; %signal% [wireless]
; %upspeed% [wireless+wired]
; %downspeed% [wireless+wired]
; %linkspeed% [wired]
; Default: (none)
;label-packetloss = %essid%
;label-packetloss-foreground = #eefafafa
; Only applies if <ramp-signal> is used
ramp-signal-0 =
ramp-signal-1 =
ramp-signal-2 =
ramp-signal-3 =
ramp-signal-4 =
; Only applies if <animation-packetloss> is used
;;animation-packetloss-0 = ⚠
;;animation-packetloss-0-foreground = #ffa64c
;;animation-packetloss-1 = ⚠
;;animation-packetloss-1-foreground = #000000
; Framerate in milliseconds
;;animation-packetloss-framerate = 500
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/pulseaudio]
type = internal/pulseaudio
; Sink to be used, if it exists (find using `pacmd list-sinks`, name field)
; If not, uses default sink
sink = alsa_output.pci-0000_12_00.3.analog-stereo
; Use PA_VOLUME_UI_MAX (~153%) if true, or PA_VOLUME_NORM (100%) if false
; Default: true
use-ui-max = true
; Interval for volume increase/decrease (in percent points)
; Default: 5
interval = 5
; Available tags:
; <label-volume> (default)
; <ramp-volume>
; <bar-volume>
format-volume = <ramp-volume> <label-volume>
; Available tags:
; <label-muted> (default)
; <ramp-volume>
; <bar-volume>
;format-muted = <label-muted>
; Available tokens:
; %percentage% (default)
;label-volume = %percentage%%
; Available tokens:
; %percentage% (default)
label-muted =  Muted
label-muted-foreground = #666
; Only applies if <ramp-volume> is used
ramp-volume-0 =
ramp-volume-1 =
ramp-volume-2 =
ramp-volume-3 =
ramp-volume-4 =
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/temperature]
type = internal/temperature
; Seconds to sleep between updates
; Default: 1
interval = 1
; Thermal zone to use
; To list all the zone types, run
; $ for i in /sys/class/thermal/thermal_zone*; do echo "$i: $(<$i/type)"; done
; Default: 0
thermal-zone = 2
; Full path of temperature sysfs path
; Use `sensors` to find preferred temperature source, then run
; $ for i in /sys/class/hwmon/hwmon*/temp*_input; do echo "$(<$(dirname $i)/name): $(cat ${i%_*}_label 2>/dev/null || echo $(basename ${i%_*})) $(readlink -f $i)"; done
; to find path to desired file
; Default reverts to thermal zone setting
;;hwmon-path = /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp1_input
; Threshold temperature to display warning label (in degrees celsius)
; Default: 80
warn-temperature = 80
; Whether or not to show units next to the temperature tokens (°C, °F)
; Default: true
units = true
; Available tags:
; <label> (default)
; <ramp>
format = <label>
format-prefix = "﨎 "
format-prefix-foreground = ${color.magenta}
format-background = ${color.black}
; Available tags:
; <label-warn> (default)
; <ramp>
format-warn = <label-warn>
format-warn-prefix = "﨎 "
format-warn-foreground = ${color.red}
format-warn-background = ${color.black}
; Available tokens:
; %temperature% (deprecated)
; %temperature-c% (default, temperature in °C)
; %temperature-f% (temperature in °F)
label = %temperature-c%
; Available tokens:
; %temperature% (deprecated)
; %temperature-c% (default, temperature in °C)
; %temperature-f% (temperature in °F)
label-warn = "%temperature-c%"
label-warn-foreground = ${color.red}
; Requires the <ramp> tag
; The icon selection will range from 0 to `warn-temperature`
; with the current temperature as index.
ramp-0 =
ramp-1 =
ramp-2 =
ramp-3 =
ramp-4 =
;;ramp-foreground = #55
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/keyboard]
type = internal/xkeyboard
; List of indicators to ignore
blacklist-0 = num lock
blacklist-1 = scroll lock
; Available tags:
; <label-layout> (default)
; <label-indicator> (default)
format =  <label-layout> <label-indicator>
;;format-spacing = 0
format-foreground = ${color.cyan}
; Available tokens:
; %layout%
; %name%
; %number%
; Default: %layout%
label-layout = %layout%
;;label-layout-padding = 2
;;label-layout-background = #bc99ed
label-layout-foreground = ${color.white}
; Available tokens:
; %name%
; Default: %name%
label-indicator = %name%
;;label-indicator-padding = 2
; label-indicator-foreground = ${color.yellow}
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/title]
type = internal/xwindow
; Available tags:
; <label> (default)
format = <label>
;;format-background = ${color.bg}
format-foreground = ${color.blue}
;;format-padding = 4
; Available tokens:
; %title%
; Default: %title%
label =  | %title%
label-maxlen = 30
; Used instead of label when there is no window title
; Available tokens:
; None
label-empty =  Arch Linux
; label-empty-foreground = ${color.blue}
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;[module/workspaces]
;type = internal/xworkspaces
;
;; Only show workspaces defined on the same output as the bar
;;
;; Useful if you want to show monitor specific workspaces
;; on different bars
;;
;; Default: false
;pin-workspaces = true
;
;; Create click handler used to focus desktop
;; Default: true
;enable-click = true
;
;; Create scroll handlers used to cycle desktops
;; Default: true
;enable-scroll = true
;
;; icon-[0-9]+ = <desktop-name>;<icon>
;; NOTE: The desktop name needs to match the name configured by the WM
;; You can get a list of the defined desktops using:
;; $ xprop -root _NET_DESKTOP_NAMES
;icon-0 = TTY;
;icon-1 = WEB;
;icon-2 = LAB;
;icon-3 = MED;
;;icon-4 = 5;
;icon-default =
;
;; Available tags:
;; <label-monitor>
;; <label-state> - gets replaced with <label-(active|urgent|occupied|empty)>
;; Default: <label-state>
;format = <label-state>
;format-padding = 0
;
;; Available tokens:
;; %name%
;; Default: %name%
;label-monitor = %name%
;
;; Available tokens:
;; %name%
;; %icon%
;; %index%
;; Default: %icon% %name%
;label-active = %name% %icon%
;label-active-foreground = ${color.ac}
;label-active-background = ${color.bg}
;;;label-active-underline = ${color.ac}
;
;; Available tokens:
;; %name%
;; %icon%
;; %index%
;; Default: %icon% %name%
;label-occupied = %icon%
;label-occupied-underline = ${color.fg}
;
;; Available tokens:
;; %name%
;; %icon%
;; %index%
;; Default: %icon% %name%
;label-urgent = %icon%
;label-urgent-foreground = ${color.red}
;label-urgent-background = ${color.bg}
;;;label-urgent-underline = ${color.red}
;
;; Available tokens:
;; %name%
;; %icon%
;; %index%
;; Default: %icon% %name%
;label-empty = %icon%
;label-empty-foreground = ${color.fg}
;
;label-active-padding = 1
;label-urgent-padding = 1
;label-occupied-padding = 1
;label-empty-padding = 1
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; __________ ______
;; / ____/ __ \/ ____/
;; / __/ / / / / /_
;; / /___/ /_/ / __/
;; /_____/\____/_/
;;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_