Update polybar configuration (include multihead)

This commit is contained in:
Tanguy Herbron 2020-07-07 02:20:44 +02:00
parent 3a4da74354
commit 3b2e802221
16 changed files with 3042 additions and 11 deletions

605
.config/polybar/bars.ini Normal file
View File

@ -0,0 +1,605 @@
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;;
;; ____
;; / __ )____ ___________
;; / __ / __ `/ ___/ ___/
;; / /_/ / /_/ / / (__ )
;; /_____/\__,_/_/ /____/
;;
;; Created By Aditya Shakya @adi1090x
;;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/volume]
type = internal/alsa
; Soundcard to be used
; Usually in the format hw:# where # is the card number
; You can find the different card numbers in `/proc/asound/cards`
;;master-soundcard = default
;;speaker-soundcard = default
;;headphone-soundcard = default
; Name of the master, speaker and headphone mixers
; Use the following command to list available mixer controls:
; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p"
; If master, speaker or headphone-soundcard isn't the default,
; use `amixer -c # scontrols` instead where # is the number
; of the master, speaker or headphone soundcard respectively
;
; Default: Master
;;master-mixer = Master
; Optionally define speaker and headphone mixers
; Default: none
;;speaker-mixer = Speaker
; Default: none
;;headphone-mixer = Headphone
; NOTE: This is required if headphone_mixer is defined
; Use the following command to list available device controls
; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort
; You may also need to use `amixer -c # controls` as above for the mixer names
; Default: none
;;headphone-id = 9
; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear
; Default: false
;;mapped = true
; Interval for volume increase/decrease (in percent points)
; Default: 5
;;interval = 5
; Available tags:
; <label-volume> (default)
; <ramp-volume>
; <bar-volume>
format-volume = <ramp-volume> <bar-volume>
; Available tags:
; <label-muted> (default)
; <ramp-volume>
; <bar-volume>
format-muted = <label-muted>
; Available tokens:
; %percentage% (default)
label-volume = %percentage%%
; Available tokens:
; %percentage% (default
format-muted-prefix =
label-muted = " Muted"
label-muted-foreground = ${color.ac}
; Only applies if <ramp-volume> is used
ramp-volume-0 =
ramp-volume-1 =
ramp-volume-2 =
ramp-volume-3 =
ramp-volume-4 =
; Only applies if <bar-volume> is used
bar-volume-width = 10
bar-volume-gradient = false
bar-volume-indicator =
bar-volume-indicator-foreground = ${color.bi}
bar-volume-indicator-font = 2
bar-volume-fill =
bar-volume-foreground-0 = ${color.bn}
bar-volume-foreground-1 = ${color.bn}
bar-volume-foreground-2 = ${color.bn}
bar-volume-foreground-3 = ${color.bn}
bar-volume-foreground-4 = ${color.bm}
bar-volume-foreground-5 = ${color.bm}
bar-volume-foreground-6 = ${color.bm}
bar-volume-foreground-7 = ${color.bd}
bar-volume-foreground-8 = ${color.bd}
bar-volume-fill-font = 2
bar-volume-empty =
bar-volume-empty-foreground = ${color.be}
bar-volume-empty-font = 2
; If defined, it will replace <ramp-volume> when
; headphones are plugged in to `headphone_control_numid`
; If undefined, <ramp-volume> will be used for both
; Only applies if <ramp-volume> is used
ramp-headphones-0 =
ramp-headphones-1 =
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/brightness]
type = internal/xbacklight
; Use the following command to list available cards:
; $ ls -1 /sys/class/backlight/
card = intel_backlight
; Available tags:
; <label> (default)
; <ramp>
; <bar>
format = <ramp> <bar>
; Available tokens:
; %percentage% (default)
label = %percentage%%
; Only applies if <ramp> is used
ramp-0 =
ramp-1 =
ramp-2 =
ramp-3 =
ramp-4 =
;; Other Icons
;
; Only applies if <bar> is used
bar-width = 10
bar-gradient = false
bar-indicator =
bar-indicator-foreground = ${color.bi}
bar-indicator-font = 2
bar-fill =
bar-foreground-0 = ${color.bn}
bar-foreground-1 = ${color.bn}
bar-foreground-2 = ${color.bn}
bar-foreground-3 = ${color.bm}
bar-foreground-4 = ${color.bm}
bar-foreground-5 = ${color.bd}
bar-foreground-6 = ${color.bd}
bar-foreground-7 = ${color.bd}
bar-foreground-8 = ${color.bd}
bar-fill-font = 2
bar-empty =
bar-empty-foreground = ${color.be}
bar-empty-font = 2
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/battery_bar]
type = internal/battery
; This is useful in case the battery never reports 100% charge
full-at = 99
; Use the following command to list batteries and adapters:
; $ ls -1 /sys/class/power_supply/
battery = BAT1
adapter = ACAD
; If an inotify event haven't been reported in this many
; seconds, manually poll for new values.
;
; Needed as a fallback for systems that don't report events
; on sysfs/procfs.
;
; Disable polling by setting the interval to 0.
;
; Default: 5
poll-interval = 2
; see "man date" for details on how to format the time string
; NOTE: if you want to use syntax tags here you need to use %%{...}
; Default: %H:%M:%S
time-format = %H:%M
; Available tags:
; <label-charging> (default)
; <bar-capacity>
; <ramp-capacity>
; <animation-charging>
format-charging = <bar-capacity>
format-charging-prefix = " "
; Available tags:
; <label-discharging> (default)
; <bar-capacity>
; <ramp-capacity>
; <animation-discharging>
format-discharging = <bar-capacity>
format-discharging-prefix = " "
; Available tags:
; <label-full> (default)
; <bar-capacity>
; <ramp-capacity>
;format-full = <ramp-capacity> <label-full>
; Available tokens:
; %percentage% (default)
; %time%
; %consumption% (shows current charge rate in watts)
label-charging = %percentage%%
; Available tokens:
; %percentage% (default)
; %time%
; %consumption% (shows current discharge rate in watts)
label-discharging = %percentage%%
; Available tokens:
; %percentage% (default)
label-full = Fully Charged
; Only applies if <bar-capacity> is used
bar-capacity-width = 10
bar-capacity-gradient = false
bar-capacity-indicator =
bar-capacity-indicator-foreground = ${color.bi}
bar-capacity-indicator-font = 2
bar-capacity-fill =
bar-capacity-foreground-0 = ${color.bd}
bar-capacity-foreground-1 = ${color.bd}
bar-capacity-foreground-2 = ${color.bd}
bar-capacity-foreground-3 = ${color.bm}
bar-capacity-foreground-4 = ${color.bm}
bar-capacity-foreground-5 = ${color.bm}
bar-capacity-foreground-6 = ${color.bm}
bar-capacity-foreground-7 = ${color.bn}
bar-capacity-foreground-8 = ${color.bn}
bar-capacity-fill-font = 2
bar-capacity-empty =
bar-capacity-empty-foreground = ${color.be}
bar-capacity-empty-font = 2
; Only applies if <ramp-capacity> is used
ramp-capacity-0 =
ramp-capacity-1 =
ramp-capacity-2 =
ramp-capacity-3 =
ramp-capacity-4 =
ramp-capacity-5 =
ramp-capacity-6 =
ramp-capacity-7 =
ramp-capacity-8 =
ramp-capacity-9 =
; Only applies if <animation-charging> is used
animation-charging-0 =
animation-charging-1 =
animation-charging-2 =
animation-charging-3 =
animation-charging-4 =
animation-charging-5 =
animation-charging-6 =
animation-charging-7 =
animation-charging-8 =
; Framerate in milliseconds
animation-charging-framerate = 750
; Only applies if <animation-discharging> is used
;;animation-discharging-0 = 
;;animation-discharging-1 = 
;;animation-discharging-2 = 
;;animation-discharging-3 = 
;;animation-discharging-4 = 
;;animation-discharging-5 = 
;;animation-discharging-6 = 
;;animation-discharging-7 = 
;;animation-discharging-8 = 
; Framerate in milliseconds
;animation-discharging-framerate = 500
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/cpu_bar]
type = internal/cpu
; Seconds to sleep between updates
; Default: 1
interval = 0.5
; Available tags:
; <label> (default)
; <bar-load>
; <ramp-load>
; <ramp-coreload>
;;format = <label> <ramp-coreload>
format = <bar-load> <label>
format-prefix = " "
; Available tokens:
; %percentage% (default) - total cpu load averaged over all cores
; %percentage-sum% - Cumulative load on all cores
; %percentage-cores% - load percentage for each core
; %percentage-core[1-9]% - load percentage for specific core
label = "%percentage%%"
; Only applies if <bar-load> is used
bar-load-width = 10
bar-load-gradient = false
bar-load-indicator =
bar-load-indicator-foreground = ${color.bi}
bar-load-indicator-font = 2
bar-load-fill =
bar-load-foreground-0 = ${color.bn}
bar-load-foreground-1 = ${color.bn}
bar-load-foreground-2 = ${color.bn}
bar-load-foreground-3 = ${color.bm}
bar-load-foreground-4 = ${color.bm}
bar-load-foreground-5 = ${color.bm}
bar-load-foreground-6 = ${color.bd}
bar-load-foreground-7 = ${color.bd}
bar-load-foreground-8 = ${color.bd}
bar-load-fill-font = 2
bar-load-empty =
bar-load-empty-foreground = ${color.be}
bar-load-empty-font = 2
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/filesystem_bar]
type = internal/fs
; Mountpoints to display
mount-0 = /
;;mount-1 = /home
;;mount-2 = /var
; Seconds to sleep between updates
; Default: 30
interval = 10
; Display fixed precision values
; Default: false
fixed-values = false
; Spacing between entries
; Default: 2
;;spacing = 4
; Available tags:
; <label-mounted> (default)
; <bar-free>
; <bar-used>
; <ramp-capacity>
format-mounted = <bar-used> <label-mounted>
format-mounted-prefix = " "
; Available tags:
; <label-unmounted> (default)
;;format-unmounted = <label-unmounted>
;;format-unmounted-prefix = 
; Available tokens:
; %mountpoint%
; %type%
; %fsname%
; %percentage_free%
; %percentage_used%
; %total%
; %free%
; %used%
; Default: %mountpoint% %percentage_free%%
label-mounted = %used%/%total%
; Available tokens:
; %mountpoint%
; Default: %mountpoint% is not mounted
;;label-unmounted = %mountpoint%: not mounted
; Only applies if <bar-used> is used
bar-used-width = 10
bar-used-gradient = false
bar-used-indicator =
bar-used-indicator-foreground = ${color.bi}
bar-used-indicator-font = 2
bar-used-fill =
bar-used-foreground-0 = ${color.bn}
bar-used-foreground-1 = ${color.bn}
bar-used-foreground-2 = ${color.bn}
bar-used-foreground-3 = ${color.bn}
bar-used-foreground-4 = ${color.bn}
bar-used-foreground-5 = ${color.bm}
bar-used-foreground-6 = ${color.bm}
bar-used-foreground-7 = ${color.bd}
bar-used-foreground-8 = ${color.bd}
bar-used-fill-font = 2
bar-used-empty =
bar-used-empty-foreground = ${color.be}
bar-used-empty-font = 2
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/memory_bar]
type = internal/memory
; Seconds to sleep between updates
; Default: 1
interval = 2
; Available tags:
; <label> (default)
; <bar-used>
; <bar-free>
; <ramp-used>
; <ramp-free>
; <bar-swap-used>
; <bar-swap-free>
; <ramp-swap-used>
; <ramp-swap-free>
format = <bar-used> <label>
format-prefix = " "
; Available tokens:
; %percentage_used% (default)
; %percentage_free%
; %gb_used%
; %gb_free%
; %gb_total%
; %mb_used%
; %mb_free%
; %mb_total%
; %percentage_swap_used%
; %percentage_swap_free%
; %mb_swap_total%
; %mb_swap_free%
; %mb_swap_used%
; %gb_swap_total%
; %gb_swap_free%
; %gb_swap_used%
label = "%mb_used%"
; Only applies if <bar-used> is used
bar-used-width = 10
bar-used-gradient = false
bar-used-indicator =
bar-used-indicator-foreground = ${color.bi}
bar-used-indicator-font = 2
bar-used-fill =
bar-used-foreground-0 = ${color.bn}
bar-used-foreground-1 = ${color.bn}
bar-used-foreground-2 = ${color.bn}
bar-used-foreground-3 = ${color.bm}
bar-used-foreground-4 = ${color.bm}
bar-used-foreground-5 = ${color.bm}
bar-used-foreground-6 = ${color.bd}
bar-used-foreground-7 = ${color.bd}
bar-used-foreground-8 = ${color.bd}
bar-used-fill-font = 2
bar-used-empty =
bar-used-empty-foreground = ${color.be}
bar-used-empty-font = 2
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/mpd_bar]
type = internal/mpd
; Host where mpd is running (either ip or domain name)
; Can also be the full path to a unix socket where mpd is running.
;;host = 127.0.0.1
;;port = 6600
;;password = mysecretpassword
; Seconds to sleep between progressbar/song timer sync
; Default: 1
interval = 1
; Available tags:
; <label-song> (default)
; <label-time>
; <bar-progress>
; <toggle> - gets replaced with <icon-(pause|play)>
; <toggle-stop> - gets replaced with <icon-(stop|play)>
; <icon-random>
; <icon-repeat>
; <icon-repeatone> (deprecated)
; <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone>
; <icon-consume>
; <icon-prev>
; <icon-stop>
; <icon-play>
; <icon-pause>
; <icon-next>
; <icon-seekb>
; <icon-seekf>
format-online =  <label-song> <bar-progress> <label-time>
;format-playing = ${self.format-online}
;format-paused = ${self.format-online}
;format-stopped = ${self.format-online}
; Available tags:
; <label-offline>
;format-offline = <label-offline>
; Available tokens:
; %artist%
; %album-artist%
; %album%
; %date%
; %title%
; Default: %artist% - %title%
label-song = "%title%"
label-song-maxlen = 25
label-song-ellipsis = true
; Available tokens:
; %elapsed%
; %total%
; Default: %elapsed% / %total%
;;abel-time = %elapsed% / %total%
; Available tokens:
; None
label-offline = "mpd is offline"
; Only applies if <icon-X> is used
icon-play =
icon-pause =
icon-stop =
icon-prev =
icon-next =
icon-seekb =
icon-seekf =
icon-random = 🔀
icon-repeat = 🔁
icon-repeatone = 🔂
icon-single = 🔂
icon-consume =
; Used to display the state of random/repeat/repeatone/single
; Only applies if <icon-[random|repeat|repeatone|single]> is used
;;toggle-on-foreground = #ff
;;toggle-off-foreground = #55
; Only applies if <bar-progress> is used
bar-progress-width = 10
bar-progress-gradient = true
bar-progress-indicator =
bar-progress-indicator-foreground = ${color.bi}
bar-progress-indicator-font = 2
bar-progress-fill =
bar-progress-foreground-0 = ${color.bn}
bar-progress-foreground-1 = ${color.bn}
bar-progress-foreground-2 = ${color.bn}
bar-progress-foreground-3 = ${color.bm}
bar-progress-foreground-4 = ${color.bm}
bar-progress-foreground-5 = ${color.bm}
bar-progress-foreground-6 = ${color.bd}
bar-progress-foreground-7 = ${color.bd}
bar-progress-foreground-8 = ${color.bd}
bar-progress-fill-font = 2
bar-progress-empty =
bar-progress-empty-foreground = ${color.be}
bar-progress-empty-font = 2
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; __________ ______
;; / ____/ __ \/ ____/
;; / __/ / / / / /_
;; / /___/ /_/ / __/
;; /_____/\____/_/
;;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

265
.config/polybar/colors.ini Normal file
View File

@ -0,0 +1,265 @@
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;;
;; ______ __
;; / ____/___ / /___ __________
;; / / / __ \/ / __ \/ ___/ ___/
;; / /___/ /_/ / / /_/ / / (__ )
;; \____/\____/_/\____/_/ /____/
;;
;; Created By Aditya Shakya @adi1090x
;;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[color]
;; Active Colors
bg = #263238
fg = #DFDFDF
ac = #00BCD4
;; Bars
bi = #00BCD4
be = #00BCD4
bf = #43a047
bn = #43a047
bm = #fdd835
bd = #e53935
;bg = #112526
;fg = #AE9793
;ac = #EE7313
;; Bars
;bi = #EE7313
;be = #EE7313
;bf = #43a047
;bn = #43a047
;bm = #fdd835
;bd = #e53935
trans = #00000000
white = #FFFFFF
black = #000000
;; Material Colors
red = #e53935
pink = #d81b60
purple = #8e24aa
deep-purple = #5e35b1
indigo = #3949ab
blue = #1e88e5
light-blue = #039be5
cyan = #00acc1
teal = #00897b
green = #43a047
light-green = #7cb342
lime = #c0ca33
yellow = #fdd835
amber = #ffb300
orange = #fb8c00
deep-orange = #f4511e
brown = #6d4c41
grey = #757575
blue-gray = #546e7a
;; Material Colors Shades
; Amber
amshade1 = #FF6F00
amshade2 = #FF8F00
amshade3 = #FFA000
amshade4 = #FFB300
amshade5 = #FFC107
amshade6 = #FFCA28
amshade7 = #FFD54F
amshade8 = #FFE082
; Blue
blshade1 = #0D47A1
blshade2 = #1565C0
blshade3 = #1976D2
blshade4 = #1E88E5
blshade5 = #2196F3
blshade6 = #42A5F5
blshade7 = #64B5F6
blshade8 = #90CAF9
; Blue-Grey
bgshade1 = #263238
bgshade2 = #37474F
bgshade3 = #455A64
bgshade4 = #546E7A
bgshade5 = #607D8B
bgshade6 = #78909C
bgshade7 = #90A4AE
bgshade8 = #B0BEC5
; Brown
brshade1 = #3E2723
brshade2 = #4E342E
brshade3 = #5D4037
brshade4 = #6D4C41
brshade5 = #795548
brshade6 = #8D6E63
brshade7 = #A1887F
brshade8 = #BCAAA4
; Cyan
cyshade1 = #006064
cyshade2 = #00838F
cyshade3 = #0097A7
cyshade4 = #00ACC1
cyshade5 = #00BCD4
cyshade6 = #26C6DA
cyshade7 = #4DD0E1
cyshade8 = #80DEEA
; Deep-Orange
doshade1 = #BF360C
doshade2 = #D84315
doshade3 = #E64A19
doshade4 = #F4511E
doshade5 = #FF5722
doshade6 = #FF7043
doshade7 = #FF8A65
doshade8 = #FFAB91
; Deep-Purple
dpshade1 = #311B92
dpshade2 = #4527A0
dpshade3 = #512DA8
dpshade4 = #5E35B1
dpshade5 = #673AB7
dpshade6 = #7E57C2
dpshade7 = #9575CD
dpshade8 = #B39DDB
; Green
grshade1 = #1B5E20
grshade2 = #2E7D32
grshade3 = #388E3C
grshade4 = #43A047
grshade5 = #4CAF50
grshade6 = #66BB6A
grshade7 = #81C784
grshade8 = #A5D6A7
; Grey
greshade1 = #212121
greshade2 = #424242
greshade3 = #616161
greshade4 = #757575
greshade5 = #9E9E9E
greshade6 = #BDBDBD
greshade7 = #D4D4D4
greshade8 = #EEEEEE
; Indigo
inshade1 = #1A237E
inshade2 = #283593
inshade3 = #303F9F
inshade4 = #3949AB
inshade5 = #3F51B5
inshade6 = #5C6BC0
inshade7 = #7986CB
inshade8 = #9FA8DA
; Light-Blue
lbshade1 = #01579B
lbshade2 = #0277BD
lbshade3 = #0288D1
lbshade4 = #039BE5
lbshade5 = #03A9F4
lbshade6 = #29B6F6
lbshade7 = #4FC3F7
lbshade8 = #81D4FA
; Light-Green
lgshade1 = #33691E
lgshade2 = #558B2F
lgshade3 = #689F38
lgshade4 = #7CB342
lgshade5 = #8BC34A
lgshade6 = #9CCC65
lgshade7 = #AED581
lgshade8 = #C5E1A5
; Lime
lishade1 = #827717
lishade2 = #9E9D24
lishade3 = #AFB42B
lishade4 = #C0CA33
lishade5 = #CDDC39
lishade6 = #D4E157
lishade7 = #DCE775
lishade8 = #E6EE9C
; Orange
orshade1 = #E65100
orshade2 = #EF6C00
orshade3 = #F57C00
orshade4 = #FB8C00
orshade5 = #FF9800
orshade6 = #FFA726
orshade7 = #FFB74D
orshade8 = #FFCC80
; Pink
pishade1 = #880E4F
pishade2 = #AD1457
pishade3 = #C2185B
pishade4 = #D81B60
pishade5 = #E91E63
pishade6 = #EC407A
pishade7 = #F06292
pishade8 = #F48FB1
; Purple
prshade1 = #4A148C
prshade2 = #6A1B9A
prshade3 = #7B1FA2
prshade4 = #8E24AA
prshade5 = #9C27B0
prshade6 = #AB47BC
prshade7 = #BA68C8
prshade8 = #CE93D8
; Red
reshade1 = #B71C1C
reshade2 = #C62828
reshade3 = #D32F2F
reshade4 = #E53935
reshade5 = #EE413D
reshade6 = #EF5350
reshade7 = #E57373
reshade8 = #EF9A9A
; Teal
teshade1 = #004D40
teshade2 = #00695C
teshade3 = #00796B
teshade4 = #00897B
teshade5 = #009688
teshade6 = #26A69A
teshade7 = #4DB6AC
teshade8 = #80CBC4
; Yellow
yeshade1 = #F57F17
yeshade2 = #F9A825
yeshade3 = #FBC02D
yeshade4 = #FDD835
yeshade5 = #FFEB3B
yeshade6 = #FFEE58
yeshade7 = #FFF176
yeshade8 = #FFF59D
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; __________ ______
;; / ____/ __ \/ ____/
;; / __/ / / / / /_
;; / /___/ /_/ / __/
;; /_____/\____/_/
;;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

View File

@ -0,0 +1,334 @@
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;;
;; ____ __ __
;; / __ \____ / /_ __/ /_ ____ ______
;; / /_/ / __ \/ / / / / __ \/ __ `/ ___/
;; / ____/ /_/ / / /_/ / /_/ / /_/ / /
;; /_/ \____/_/\__, /_.___/\__,_/_/
;; /____/
;;
;; Created By Aditya Shakya @adi1090x
;;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; Global WM Settings
[global/wm]
; Adjust the _NET_WM_STRUT_PARTIAL top value
; Used for top aligned bars
margin-bottom = 0
; Adjust the _NET_WM_STRUT_PARTIAL bottom value
; Used for bottom aligned bars
margin-top = 0
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; File Inclusion
; include an external file, like module file, etc.
include-file = ~/.config/polybar/colors.ini
include-file = ~/.config/polybar/modules.ini
include-file = ~/.config/polybar/user_modules.ini
include-file = ~/.config/polybar/bars.ini
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; Bar Settings
[bar/bottom]
; Use either of the following command to list available outputs:
; If unspecified, the application will pick the first one it finds.
; $ polybar -m | cut -d ':' -f 1
; $ xrandr -q | grep " connected" | cut -d ' ' -f1
monitor = ${env:MONITOR:}
; Use the specified monitor as a fallback if the main one is not found.
monitor-fallback =
; Require the monitor to be in connected state
; XRandR sometimes reports my monitor as being disconnected (when in use)
monitor-strict = false
; Tell the Window Manager not to configure the window.
; Use this to detach the bar if your WM is locking its size/position.
override-redirect = false
; Put the bar at the bottom of the screen
bottom = true
; Prefer fixed center position for the `modules-center` block
; When false, the center position will be based on the size of the other blocks.
fixed-center = true
; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
; the percentage can optionally be extended with a pixel offset like so:
; 50%:-10, this will result in a width or height of 50% minus 10 pixels
width = 100%
height = 30
; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
; the percentage can optionally be extended with a pixel offset like so:
; 50%:-10, this will result in an offset in the x or y direction
; of 50% minus 10 pixels
offset-x = 0
offset-y = 0
; Background ARGB color (e.g. #f00, #ff992a, #ddff1023)
background = ${color.bg}
; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023)
foreground = ${color.fg}
; Background gradient (vertical steps)
; background-[0-9]+ = #aarrggbb
;;background-0 =
; Value used for drawing rounded corners
; Note: This shouldn't be used together with border-size because the border
; doesn't get rounded
; Individual top/bottom values can be defined using:
; radius-{top,bottom}
radius-top = 0.0
radius-bottom = 0.0
; Under-/overline pixel size and argb color
; Individual values can be defined using:
; {overline,underline}-size
; {overline,underline}-color
line-size = 2
line-color = ${color.ac}
; Values applied to all borders
; Individual side values can be defined using:
; border-{left,top,right,bottom}-size
; border-{left,top,right,bottom}-color
; The top and bottom borders are added to the bar height, so the effective
; window height is:
; height + border-top-size + border-bottom-size
; Meanwhile the effective window width is defined entirely by the width key and
; the border is placed withing this area. So you effectively only have the
; following horizontal space on the bar:
; width - border-right-size - border-left-size
border-top-size = 2
border-color = ${color.ac}
; Number of spaces to add at the beginning/end of the bar
; Individual side values can be defined using:
; padding-{left,right}
padding = 1
; Number of spaces to add before/after each module
; Individual side values can be defined using:
; module-margin-{left,right}
module-margin-left = 1
module-margin-right = 1
; Fonts are defined using <font-name>;<vertical-offset>
; Font names are specified using a fontconfig pattern.
; font-0 = NotoSans-Regular:size=8;2
; font-1 = MaterialIcons:size=10
; font-2 = Termsynu:size=8;-1
; font-3 = FontAwesome:size=10
; See the Fonts wiki page for more details
font-0 = "Misc Termsyn:size=12;1"
font-1 = "Wuncon Siji:size=12;1"
font-2 = "xos4 Terminus:size=12;1"
; Modules are added to one of the available blocks
; modules-left = cpu ram
; modules-center = xwindow xbacklight
; modules-right = ipc clock
;; Available modules
;;
;alsa backlight battery
;bspwm cpu date
;filesystem github i3
;subscriber demo memory
;menu-apps mpd wired-network
;wireless-network network pulseaudio
;name_you_want temperature my-text-label
;backlight keyboard title workspaces
;;
;; User modules
;checknetwork updates window_switch launcher powermenu sysmenu menu
;;
;; Bars
;cpu_bar memory_bar filesystem_bar mpd_bar
;volume brightness battery_bar
modules-left = mpd
modules-center = filesystem cpu memory temperature updates network
modules-right = volume brightness date
; The separator will be inserted between the output of each module
separator =
; This value is used to add extra spacing between elements
; @deprecated: This parameter will be removed in an upcoming version
spacing = 0
; Opacity value between 0.0 and 1.0 used on fade in/out
dim-value = 1.0
; Value to be used to set the WM_NAME atom
; If the value is empty or undefined, the atom value
; will be created from the following template: polybar-[BAR]_[MONITOR]
; NOTE: The placeholders are not available for custom values
wm-name =
; Locale used to localize various module data (e.g. date)
; Expects a valid libc locale, for example: sv_SE.UTF-8
locale =
; Position of the system tray window
; If empty or undefined, tray support will be disabled
; NOTE: A center aligned tray will cover center aligned modules
;
; Available positions:
; left
; center
; right
; none
tray-position = none
; If true, the bar will not shift its
; contents when the tray changes
tray-detached = false
; Tray icon max size
tray-maxsize = 16
; DEPRECATED! Since 3.3.0 the tray always uses pseudo-transparency
; Enable pseudo transparency
; Will automatically be enabled if a fully transparent
; background color is defined using `tray-background`
tray-transparent = false
; Background color for the tray container
; ARGB color (e.g. #f00, #ff992a, #ddff1023)
; By default the tray container will use the bar
; background color.
tray-background = ${root.background}
; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
tray-offset-x = 0
tray-offset-y = 0
; Pad the sides of each tray icon
tray-padding = 0
; Scale factor for tray clients
tray-scale = 1.0
; Restack the bar window and put it above the
; selected window manager's root
;
; Fixes the issue where the bar is being drawn
; on top of fullscreen window's
;
; Currently supported WM's:
; bspwm
; i3 (requires: `override-redirect = true`)
; wm-restack =
; Set a DPI values used when rendering text
; This only affects scalable fonts
; dpi =
; Enable support for inter-process messaging
; See the Messaging wiki page for more details.
enable-ipc = false
; Fallback click handlers that will be called if
; there's no matching module handler found.
click-left =
click-middle =
click-right =
scroll-up =
scroll-down =
double-click-left =
double-click-middle =
double-click-right =
; Requires polybar to be built with xcursor support (xcb-util-cursor)
; Possible values are:
; - default : The default pointer as before, can also be an empty string (default)
; - pointer : Typically in the form of a hand
; - ns-resize : Up and down arrows, can be used to indicate scrolling
cursor-click =
cursor-scroll =
;; WM Workspace Specific
; bspwm
;;scroll-up = bspwm-desknext
;;scroll-down = bspwm-deskprev
;;scroll-up = bspc desktop -f prev.local
;;scroll-down = bspc desktop -f next.local
;i3
;;scroll-up = i3wm-wsnext
;;scroll-down = i3wm-wsprev
;;scroll-up = i3-msg workspace next_on_output
;;scroll-down = i3-msg workspace prev_on_output
;openbox
;awesome
;etc
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; Application Settings
[settings]
; The throttle settings lets the eventloop swallow up til X events
; if they happen within Y millisecond after first event was received.
; This is done to prevent flood of update event.
;
; For example if 5 modules emit an update event at the same time, we really
; just care about the last one. But if we wait too long for events to swallow
; the bar would appear sluggish so we continue if timeout
; expires or limit is reached.
throttle-output = 5
throttle-output-for = 10
; Time in milliseconds that the input handler will wait between processing events
throttle-input-for = 30
; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events
screenchange-reload = false
; Compositing operators
; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t
compositing-background = source
compositing-foreground = over
compositing-overline = over
compositing-underline = over
compositing-border = over
; Define fallback values used by all module formats
format-foreground =
format-background =
format-underline =
format-overline =
format-spacing =
format-padding =
format-margin =
format-offset =
; Enables pseudo-transparency for the bar
; If set to true the bar can be transparent without a compositor.
pseudo-transparency = false
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; __________ ______
;; / ____/ __ \/ ____/
;; / __/ / / / / /_
;; / /___/ /_/ / __/
;; /_____/\____/_/
;;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

View File

@ -0,0 +1,333 @@
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;;
;; ____ __ __
;; / __ \____ / /_ __/ /_ ____ ______
;; / /_/ / __ \/ / / / / __ \/ __ `/ ___/
;; / ____/ /_/ / / /_/ / /_/ / /_/ / /
;; /_/ \____/_/\__, /_.___/\__,_/_/
;; /____/
;;
;; Created By Aditya Shakya @adi1090x
;;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; Global WM Settings
[global/wm]
; Adjust the _NET_WM_STRUT_PARTIAL top value
; Used for top aligned bars
margin-bottom = 0
; Adjust the _NET_WM_STRUT_PARTIAL bottom value
; Used for bottom aligned bars
margin-top = 0
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; File Inclusion
; include an external file, like module file, etc.
include-file = ~/.config/polybar/colors.ini
include-file = ~/.config/polybar/modules.ini
include-file = ~/.config/polybar/user_modules.ini
include-file = ~/.config/polybar/bars.ini
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; Bar Settings
[bar/top]
; Use either of the following command to list available outputs:
; If unspecified, the application will pick the first one it finds.
; $ polybar -m | cut -d ':' -f 1
; $ xrandr -q | grep " connected" | cut -d ' ' -f1
monitor = ${env:MONITOR:}
; Use the specified monitor as a fallback if the main one is not found.
monitor-fallback =
; Require the monitor to be in connected state
; XRandR sometimes reports my monitor as being disconnected (when in use)
monitor-strict = false
; Tell the Window Manager not to configure the window.
; Use this to detach the bar if your WM is locking its size/position.
override-redirect = false
; Put the bar at the bottom of the screen
bottom = false
; Prefer fixed center position for the `modules-center` block
; When false, the center position will be based on the size of the other blocks.
fixed-center = true
; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
; the percentage can optionally be extended with a pixel offset like so:
; 50%:-10, this will result in a width or height of 50% minus 10 pixels
width = 100%
height = 30
; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
; the percentage can optionally be extended with a pixel offset like so:
; 50%:-10, this will result in an offset in the x or y direction
; of 50% minus 10 pixels
offset-x = 0
offset-y = 0
; Background ARGB color (e.g. #f00, #ff992a, #ddff1023)
background = ${color.bg}
; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023)
foreground = ${color.fg}
; Background gradient (vertical steps)
; background-[0-9]+ = #aarrggbb
;;background-0 =
; Value used for drawing rounded corners
; Note: This shouldn't be used together with border-size because the border
; doesn't get rounded
; Individual top/bottom values can be defined using:
; radius-{top,bottom}
radius-top = 0.0
radius-bottom = 0.0
; Under-/overline pixel size and argb color
; Individual values can be defined using:
; {overline,underline}-size
; {overline,underline}-color
line-size = 2
line-color = ${color.ac}
; Values applied to all borders
; Individual side values can be defined using:
; border-{left,top,right,bottom}-size
; border-{left,top,right,bottom}-color
; The top and bottom borders are added to the bar height, so the effective
; window height is:
; height + border-top-size + border-bottom-size
; Meanwhile the effective window width is defined entirely by the width key and
; the border is placed withing this area. So you effectively only have the
; following horizontal space on the bar:
; width - border-right-size - border-left-size
border-bottom-size = 2
border-color = ${color.ac}
; Number of spaces to add at the beginning/end of the bar
; Individual side values can be defined using:
; padding-{left,right}
padding = 1
; Number of spaces to add before/after each module
; Individual side values can be defined using:
; module-margin-{left,right}
module-margin-left = 1
module-margin-right = 1
; Fonts are defined using <font-name>;<vertical-offset>
; Font names are specified using a fontconfig pattern.
; font-0 = NotoSans-Regular:size=8;2
; font-1 = MaterialIcons:size=10
; font-2 = Termsynu:size=8;-1
; font-3 = FontAwesome:size=10
; See the Fonts wiki page for more details
font-0 = "Misc Termsyn:size=12;1"
font-1 = "Wuncon Siji:size=12;1"
font-2 = "xos4 Terminus:size=12;2"
; Modules are added to one of the available blocks
; modules-left = cpu ram
; modules-center = xwindow xbacklight
; modules-right = ipc clock
;; Available modules
;;
;alsa backlight battery
;bspwm cpu date
;filesystem github i3
;subscriber demo memory
;menu-apps mpd wired-network
;wireless-network network pulseaudio
;name_you_want temperature my-text-label
;backlight keyboard title workspaces
;;
;; User modules
;checknetwork updates window_switch launcher powermenu sysmenu menu
;;
;; Bars
;cpu_bar memory_bar filesystem_bar mpd_bar
;volume brightness battery_bar
modules-left = menu title
modules-center = workspaces
modules-right = window_switch keyboard battery alsa checknetwork sysmenu
; The separator will be inserted between the output of each module
separator =
; This value is used to add extra spacing between elements
; @deprecated: This parameter will be removed in an upcoming version
spacing = 0
; Opacity value between 0.0 and 1.0 used on fade in/out
dim-value = 1.0
; Value to be used to set the WM_NAME atom
; If the value is empty or undefined, the atom value
; will be created from the following template: polybar-[BAR]_[MONITOR]
; NOTE: The placeholders are not available for custom values
wm-name =
; Locale used to localize various module data (e.g. date)
; Expects a valid libc locale, for example: sv_SE.UTF-8
locale =
; Position of the system tray window
; If empty or undefined, tray support will be disabled
; NOTE: A center aligned tray will cover center aligned modules
;
; Available positions:
; left
; center
; right
; none
tray-position = none
; If true, the bar will not shift its
; contents when the tray changes
tray-detached = false
; Tray icon max size
tray-maxsize = 16
; DEPRECATED! Since 3.3.0 the tray always uses pseudo-transparency
; Enable pseudo transparency
; Will automatically be enabled if a fully transparent
; background color is defined using `tray-background`
tray-transparent = false
; Background color for the tray container
; ARGB color (e.g. #f00, #ff992a, #ddff1023)
; By default the tray container will use the bar
; background color.
tray-background = ${root.background}
; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
tray-offset-x = 0
tray-offset-y = 0
; Pad the sides of each tray icon
tray-padding = 0
; Scale factor for tray clients
tray-scale = 1.0
; Restack the bar window and put it above the
; selected window manager's root
;
; Fixes the issue where the bar is being drawn
; on top of fullscreen window's
;
; Currently supported WM's:
; bspwm
; i3 (requires: `override-redirect = true`)
; wm-restack =
; Set a DPI values used when rendering text
; This only affects scalable fonts
; dpi =
; Enable support for inter-process messaging
; See the Messaging wiki page for more details.
enable-ipc = false
; Fallback click handlers that will be called if
; there's no matching module handler found.
click-left =
click-middle =
click-right =
scroll-up =
scroll-down =
double-click-left =
double-click-middle =
double-click-right =
; Requires polybar to be built with xcursor support (xcb-util-cursor)
; Possible values are:
; - default : The default pointer as before, can also be an empty string (default)
; - pointer : Typically in the form of a hand
; - ns-resize : Up and down arrows, can be used to indicate scrolling
cursor-click =
cursor-scroll =
;; WM Workspace Specific
; bspwm
;;scroll-up = bspwm-desknext
;;scroll-down = bspwm-deskprev
;;scroll-up = bspc desktop -f prev.local
;;scroll-down = bspc desktop -f next.local
;i3
;;scroll-up = i3wm-wsnext
;;scroll-down = i3wm-wsprev
;;scroll-up = i3-msg workspace next_on_output
;;scroll-down = i3-msg workspace prev_on_output
;openbox
;awesome
;etc
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; Application Settings
[settings]
; The throttle settings lets the eventloop swallow up til X events
; if they happen within Y millisecond after first event was received.
; This is done to prevent flood of update event.
;
; For example if 5 modules emit an update event at the same time, we really
; just care about the last one. But if we wait too long for events to swallow
; the bar would appear sluggish so we continue if timeout
; expires or limit is reached.
throttle-output = 5
throttle-output-for = 10
; Time in milliseconds that the input handler will wait between processing events
throttle-input-for = 30
; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events
screenchange-reload = true
; Compositing operators
; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t
compositing-background = source
compositing-foreground = over
compositing-overline = over
compositing-underline = over
compositing-border = over
; Define fallback values used by all module formats
format-foreground =
format-background =
format-underline =
format-overline =
format-spacing =
format-padding =
format-margin =
format-offset =
; Enables pseudo-transparency for the bar
; If set to true the bar can be transparent without a compositor.
pseudo-transparency = false
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; __________ ______
;; / ____/ __ \/ ____/
;; / __/ / / / / /_
;; / /___/ /_/ / __/
;; /_____/\____/_/
;;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

View File

@ -1,7 +1,6 @@
#!/usr/bin/env sh
config_file =
echo "test"
## Add this to your wm startup file.
# Terminate already running bar instances
killall -q polybar
@ -9,6 +8,14 @@ killall -q polybar
# Wait until the processes have been shut down
while pgrep -u $UID -x polybar >/dev/null; do sleep 1; done
# Launch polybar
polybar -rq top_bar -c $HOME/.config/polybar/test1 &
polybar -rq bottom_bar -c $HOME/.config/polybar/test1 &
# List monitors to load the bars on every one of them
if type "xrandr"; then
for m in $(xrandr --query | grep " connected" | cut -d" " -f1); do
MONITOR=$m polybar top -c ~/.config/polybar/config-top.ini &
MONITOR=$m polybar bottom -c ~/.config/polybar/config-bottom.ini &
done
else
# Launch bar1 and bar2
polybar top -c ~/.config/polybar/config-top.ini &
polybar bottom -c ~/.config/polybar/config-bottom.ini &
fi

1146
.config/polybar/modules.ini Normal file

File diff suppressed because it is too large Load Diff

View File

@ -1,9 +1,12 @@
#!/usr/bin/env bash
count=0
disconnected=""
wireless_connected=""
ethernet_connected=""
disconnected=""
disconnected2=""
disconnected3=""
disconnected4=""
wireless_connected=""
ethernet_connected=""
ID="$(ip link | awk '/state UP/ {print $2}')"
@ -16,5 +19,8 @@ while true; do
fi
else
echo "$disconnected" ; sleep 0.5
echo "$disconnected2" ; sleep 0.5
echo "$disconnected3" ; sleep 0.5
echo "$disconnected4" ; sleep 0.5
fi
done

View File

@ -0,0 +1,5 @@
#!/bin/bash
## Created By Aditya Shakya
rofi -modi run,drun -show drun -location 1 -xoffset 10 -yoffset 32 -line-padding 4 -columns 1 -width 20 -lines 10 -padding 25 -hide-scrollbar -show-icons -drun-icon-theme "Papirus" -font "Misc Termsyn 12"

View File

@ -0,0 +1,5 @@
#!/bin/bash
## Created By Aditya Shakya
rofi -modi run,drun -show drun -line-padding 4 -columns 2 -width 40 -padding 30 -hide-scrollbar -show-icons -drun-icon-theme "Papirus" -font "Misc Termsyn 12"

View File

@ -0,0 +1,5 @@
#!/bin/bash
## Created By Aditya Shakya
rofi -show run -fullscreen True -lines 5 -line-margin 5 -padding 300 -bw 0 -font "Misc Termsyn 12"

View File

@ -0,0 +1,3 @@
#!/bin/bash
termite -e "sudo pacman -Syu"

View File

@ -0,0 +1,11 @@
#!/bin/bash
## Created By Aditya Shakya
MENU="$(rofi -sep "|" -dmenu -i -p 'System' -location 3 -yoffset 32 -xoffset -10 -width 12 -hide-scrollbar -line-padding 4 -padding 20 -lines 4 -font "Misc Termsyn 12" <<< " Lock| Logout| Reboot| Shutdown")"
case "$MENU" in
*Lock) i3lock-fancy ;;
*Logout) openbox --exit;;
*Reboot) systemctl reboot ;;
*Shutdown) systemctl -i poweroff
esac

View File

@ -0,0 +1,11 @@
#!/bin/bash
## Created By Aditya Shakya
MENU="$(rofi -sep "|" -dmenu -i -p 'System' -width 12 -hide-scrollbar -line-padding 4 -padding 20 -lines 4 -font "Misc Termsyn 12" <<< " Lock| Logout| Reboot| Shutdown")"
case "$MENU" in
*Lock) i3lock-fancy ;;
*Logout) openbox --exit;;
*Reboot) systemctl reboot ;;
*Shutdown) systemctl -i poweroff
esac

View File

@ -1,6 +1,6 @@
#!/usr/bin/env bash
BAR_ICON=""
BAR_ICON=""
NOTIFY_ICON=/usr/share/icons/Papirus/32x32/apps/system-software-update.svg
get_total_updates() { UPDATES=$(checkupdates 2>/dev/null | wc -l); }
@ -26,9 +26,9 @@ while true; do
# every 10 seconds another check for updates is done
while (( UPDATES > 0 )); do
if (( UPDATES == 1 )); then
echo "$UPDATES"
echo "$UPDATES Update"
elif (( UPDATES > 1 )); then
echo "$UPDATES"
echo "$UPDATES Updates"
else
echo $BAR_ICON
fi

View File

@ -0,0 +1,5 @@
#!/bin/bash
## Created By Aditya Shakya
rofi -modi window -show window -hide-scrollbar -font "Misc Termsyn 12" -padding 20 -line-padding 4 -width 40 -lines 6

View File

@ -0,0 +1,290 @@
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;;
;; __ __ __ ___ __ __
;; / / / /_______ _____ / |/ /___ ____/ /_ __/ /__ _____
;; / / / / ___/ _ \/ ___/ / /|_/ / __ \/ __ / / / / / _ \/ ___/
;; / /_/ (__ ) __/ / / / / / /_/ / /_/ / /_/ / / __(__ )
;; \____/____/\___/_/ /_/ /_/\____/\__,_/\__,_/_/\___/____/
;;
;; Created By Aditya Shakya @adi1090x
;;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/checknetwork]
type = custom/script
; Available tokens:
; %counter%
; Command to be executed (using "/usr/bin/env sh -c [command]")
exec = ~/.config/polybar/scripts/check-network
; Conditional command that, if defined, needs to exit successfully
; before the main exec command is invoked.
; Default: ""
;;exec-if = ""
; Will the script output continous content?
; Default: false
tail = true
; Seconds to sleep between updates
; Default: 2 (0 if `tail = true`)
interval = 5
; Available tags:
; <output> - deprecated
; <label> (default)
;;format = <label>
;;format-background = #999
;;format-foreground = #000
;;format-padding = 4
; Available tokens:
; %output%
; Default: %output%
;;label = %output:0:15:...%
; Available tokens:
; %counter%
; %pid%
;
; "click-(left|middle|right)" will be executed using "/usr/bin/env sh -c [command]"
click-left = networkmanager_dmenu &
click-middle = networkmanager_dmenu &
click-right = networkmanager_dmenu &
;;double-click-left = echo double left %counter%
;;double-click-middle = echo double middle %counter%
;;double-click-right = echo double right %counter%
; Available tokens:
; %counter%
; %pid%
;
; "scroll-(up|down)" will be executed using "/usr/bin/env sh -c [command]"
;;scroll-up = echo scroll up %counter%
;;scroll-down = echo scroll down %counter%
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/updates]
type = custom/script
; Available tokens:
; %counter%
; Command to be executed (using "/usr/bin/env sh -c [command]")
exec = ~/.config/polybar/scripts/updates.sh
; Conditional command that, if defined, needs to exit successfully
; before the main exec command is invoked.
; Default: ""
;;exec-if = ""
; Will the script output continous content?
; Default: false
tail = true
; Seconds to sleep between updates
; Default: 2 (0 if `tail = true`)
interval = 5
; Available tags:
; <output> - deprecated
; <label> (default)
;;format = <label>
;;format-background = #999
;;format-foreground = #000
;;format-padding = 4
; Available tokens:
; %output%
; Default: %output%
;;label = %output:0:15:...%
; Available tokens:
; %counter%
; %pid%
;
; "click-(left|middle|right)" will be executed using "/usr/bin/env sh -c [command]"
click-left = ~/.config/polybar/scripts/lupdates &
;;click-middle = ~/.config/polybar/scripts/lupdates &
;;click-right = ~/.config/polybar/scripts/lupdates &
;;double-click-left = echo double left %counter%
;;double-click-middle = echo double middle %counter%
;;double-click-right = echo double right %counter%
; Available tokens:
; %counter%
; %pid%
;
; "scroll-(up|down)" will be executed using "/usr/bin/env sh -c [command]"
;;scroll-up = echo scroll up %counter%
;;scroll-down = echo scroll down %counter%
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/window_switch]
type = custom/text
content =  Switch
; "content" has the same properties as "format-NAME"
;;content-background = #000
;;content-foreground = #fff
;;content-padding = 4
; "click-(left|middle|right)" will be executed using "/usr/bin/env sh -c $COMMAND"
click-left = skippy-xd
click-middle = skippy-xd
click-right = ~/.config/polybar/scripts/windows
; "scroll-(up|down)" will be executed using "/usr/bin/env sh -c $COMMAND"
;;scroll-up = skippy-xd
;;scroll-down = skippy-xd
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/launcher]
type = custom/text
content =
; "content" has the same properties as "format-NAME"
;;content-background = #000
content-foreground = ${color.ac}
;;content-padding = 4
; "click-(left|middle|right)" will be executed using "/usr/bin/env sh -c $COMMAND"
click-left = ~/.config/polybar/scripts/launcher
;;click-middle = ~/.config/polybar/scripts/launcher-full
click-right = ~/.config/polybar/scripts/launcher-alt
; "scroll-(up|down)" will be executed using "/usr/bin/env sh -c $COMMAND"
;;scroll-up = ~/.config/polybar/scripts/launcher-full
scroll-down = ~/.config/polybar/scripts/launcher-full
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/sysmenu]
type = custom/text
content =
; "content" has the same properties as "format-NAME"
;;content-background = #000
content-foreground = ${color.ac}
;;content-padding = 4
; "click-(left|middle|right)" will be executed using "/usr/bin/env sh -c $COMMAND"
click-left = ~/.config/polybar/scripts/powermenu
;;click-middle = ~/.config/polybar/scripts/powermenu
click-right = ~/.config/polybar/scripts/powermenu-alt
; "scroll-(up|down)" will be executed using "/usr/bin/env sh -c $COMMAND"
;;scroll-up = ~/.config/polybar/scripts/powermenu
;;scroll-down = ~/.config/polybar/scripts/powermenu
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/powermenu]
type = custom/menu
; If true, <label-toggle> will be to the left of the menu items (default).
; If false, it will be on the right of all the items.
expand-right = true
; "menu-LEVEL-N" has the same properties as "label-NAME" with
; the additional "exec" property
;
; Available exec commands:
; menu-open-LEVEL
; menu-close
; Other commands will be executed using "/usr/bin/env sh -c $COMMAND"
menu-0-0 = reboot
menu-0-0-exec = menu-open-1
menu-0-1 = shutdown
menu-0-1-exec = menu-open-2
menu-1-0 = back
menu-1-0-exec = menu-open-0
menu-1-1 = reboot
menu-1-1-exec = systemctl reboot
menu-2-0 = shutdown
menu-2-0-exec = systemctl poweroff
menu-2-1 = back
menu-2-1-exec = menu-open-0
; Available tags:
; <label-toggle> (default) - gets replaced with <label-(open|close)>
; <menu> (default)
; Note that if you use <label-toggle> you must also include
; the definition for <label-open>
;;format = <label-toggle> <menu>
;;format-prefix = ${menu.icon-menu}
format-spacing = 1
label-open =
label-close =
; Optional item separator
; Default: none
label-separator = |
label-open-foreground = ${color.ac}
label-close-foreground = ${color.ac}
label-separator-foreground = ${color.ac}
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/menu]
type = custom/menu
; If true, <label-toggle> will be to the left of the menu items (default).
; If false, it will be on the right of all the items.
expand-right = true
; "menu-LEVEL-N" has the same properties as "label-NAME" with
; the additional "exec" property
;
; Available exec commands:
; menu-open-LEVEL
; menu-close
; Other commands will be executed using "/usr/bin/env sh -c $COMMAND"
menu-0-0 = Menu
menu-0-0-exec = ~/.config/polybar/scripts/launcher &
menu-0-1 = Files
menu-0-1-exec = thunar &
menu-0-2 = Terminal
menu-0-2-exec = termite &
menu-0-3 = Browser
menu-0-3-exec = firefox &
; Available tags:
; <label-toggle> (default) - gets replaced with <label-(open|close)>
; <menu> (default)
; Note that if you use <label-toggle> you must also include
; the definition for <label-open>
;;format = <label-toggle> <menu>
;;format-prefix = ${menu.icon-menu}
format-spacing = 1
label-open =
label-close =
; Optional item separator
; Default: none
label-separator = |
label-open-foreground = ${color.ac}
label-close-foreground = ${color.ac}
label-separator-foreground = ${color.ac}
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; __________ ______
;; / ____/ __ \/ ____/
;; / __/ / / / / /_
;; / /___/ /_/ / __/
;; /_____/\____/_/
;;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_